ToolBarn.com

Have the perfect accessory for your Kreg Flipstop and Solid Stop with the "Perfect Miter'' Attachment (KMS7831). Conveniently versatile, it's designed to support the mitered end of a board so that the sharp point of the miter is not damaged while cutting.  It also allows the mitered end to be measured off of 2 points of contact instead of the toe of the miter, increasing accuracy.

Ensure consistent spacing between deck boards with these 1/4" Jig Spacer Rings (DECKSPACER-RED) (12 Pack) from Kreg. They create spacing that facilitates proper air ventilation while reducing twisting and bowing of deck boards. 

Kreg gives you a versatile addition to your woodworking tool shop with this 2' Top Trak (KMS7712). It can be mounted to the top-side of a shop-made 3/4"-thick fence and features a self-aligning L-shaped mounting foot for easy installation.  At 2' long, it is made of durable anondized aluminum and works with a number of woodworking machines.

Produce countless woodshop jigs and fixtures with this 24" Mini Trak (KMS7507) from Kreg. It contains t-slots that will capture the head of a standard 1/4" hex bolt, and it can be surface mounted or mounted flush into a 3/8" x 3/4" dado or rabbet. It's easily sizeable to length with a hack saw and conveniently accepts any 1/4" hex bolt.

Kreg gives you reliability and accuracy with this 30" Jig & Fixture Bar (KMS7303). It's ideal for building workshop jigs and fixtures, and it has 6 plugs along the entire length of the bar.  Mounting holes are located every 4 inches , and it's 3/8" tall x 3/4" wide. 

Produce countless woodshop jigs and fixtures with this 36" Mini Trak (KMS7508) from Kreg. It contains t-slots that will capture the head of a standard 1/4" hex bolt, and it can be surface mounted or mounted flush into a 3/8" x 3/4" dado or rabbet. It's easily sizeable to length with a hack saw and conveniently accepts any 1/4" hex bolt.

Get a router fence that no other fence compares to with Kreg's 36" Precision Router Table Fence (PRS1010). Made of durable aluminum, its Magnified Precision Lens Cursor can be used instead of a tape measure and pencil to obtain more accurate measurements. It's designed to maintain the highest standards of precision and rigidity in its class.

Make your Kreg Universal Steel Stand conveniently mobile using this 3" Dual-Locking Caster (Set of 4) (PRS3090). It includes 4 heavy duty casters with a dual locking mechanism that protects against caster roll and pivot.

Tackle heavy-use commerical applications with this 4' Heavy Duty Trak (KMS7704) from Kreg. It's the same extrusion that's included in the Kreg Deluxe Miter Gauge System. Made of durable anondized aluminum, it's extremely straight and intended for mounting to a shop-made subfence with standard 1/4" bolts.

Complete your Kreg pocket hole machines with this 4' Pocket Hole Machine Fence (DBFENCE).

Kreg gives you a versatile addition to your woodworking tool shop with this 4' Top Trak (KMS7714). It can be mounted to the top-side of a shop-made 3/4"-thick fence and features a self-aligning L-shaped mounting foot for easy installation.  At 4' long, it is made of durable anondized aluminum and works with a number of woodworking machines.

For fast and accurate face frame assembly, get Kreg's 4'x8' Face Framing Table (KFT4X8). It virtually eliminates sanding and features 4 high quality clamping cylinders (90 psi minimum) that can be precisely adjusted to apply pressure to the joint line on almost any size of frame. It stands at a 30-degree angle, allowing you to work comfortably upright, taking pressure off your back.

Achieve a higher level manual control when you adjust for band saw blade drift with this 4-1/2'' Resaw Guide (KMS7213) from Kreg. The curved face design helps you steer the board into the cut. It stands at 4-1/2" high.

Building your own router table?  Kreg has the perfect accessory for it with this 48" Combo Trak (KMS7448). It adds flexibility to your table tops and works with your miter gauge, featherboards and other accessories. 

Produce countless woodshop jigs and fixtures with this 48" Mini Trak (KMS7509) from Kreg. It contains t-slots that will capture the head of a standard 1/4" hex bolt, and it can be surface mounted or mounted flush into a 3/8" x 3/4" dado or rabbet. It's easily sizeable to length with a hack saw and conveniently accepts any 1/4" hex bolt.

Ensure consistent spacing between deck boards with these 5/16" Jig Spacer Rings (12 Pack) (DECKSPACER-BLUE) from Kreg. They create spacing that facilitates proper air ventilation while reducing twisting and bowing of deck boards. 

If you're wanting to add shelf pin holes to an existing piece of furniture, this Kreg 5mm Shelf Pin Jig (KMA3220) is the perfect tool for the job. The hardened steel drill guides ensure straight drilling, while the locating pin lets you quickly reference the last hole drilled.

Achieve a higher level manual control when you adjust for band saw blade drift with this 7'' Resaw Guide (KMS7214) from Kreg. The curved face design helps you steer the board into the cut. It stands at 7" high.

Cut crown molding with ease using this Crown-Pro from Kreg (KMA2800). It holds the trim at the exact angle required, eliminating the need for advanced compound miter cuts and coping. Plus, it has 8 no-slip rubber feet that give you a solid foundation while you are cutting for added safety and support.

Deck building and refinishing is a cinch when you've got the Kreg Deck Jig™ (KJDECKSYS).  It's perfect for creating strong wood-to-wood bonds that will ensure a durable and lasting deck. It's easy to use and works with a variety of woods, including softwoods, tropical hardwoods and composite deck boards.

Aligning drawer boxes to the slides is simple when you use Kreg's Drawer Mounting Brackets (NZ03-B). Easy to use, just clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets, pull the slide to the front of the drawer box and secure it into position by driving a screw.  It can be used with framed and frameless cabinets. 

Take the guess work out of mounting drawer slides with this Drawer Slide Mounting Tool (NZ03) from Kreg. It installs most types of metallic slides, including bottom-mount, full-extension and center-mount.  Great for building production cabinets or just a single set for your home or shop, it gives you perfect alignment every time you use it.

Make woodworking repairs quick and easy with these Drill Guide Spacer Blocks (KDGADAPT) from Kreg.

Get full use out of your Kreg KFT4X8 Framing Table with this Extra Cylinders Set (CT6002). Heavy duty and durable, each cylinder glides easily on the framing table.