ToolBarn.com

Use this 3/4" Brass Brush with your Dremel® rotary tool for cleaning and surface-finishing soft metals like gold, bronze, copper or brass. (535)

The Dremel® 1-1/4" Cut-Off Wheel is suitable for cutting or slotting bolts, screws, and sheet metal, as well as limited use on thin wood and plastic. Pack of 5 wheels. (540)

The Dremel® 7/8" Diamond Wheel is completely coated with fine diamond particles for working with hard materials like marble, concrete, brick, porcelain and more. (545)

The EZ Lock Cut-off Wheels feature a one-piece mandrel design, simplifying the process to change wheels and creates an easier cutting process through metal.

The EZ Lock Starter Kit (EZ406) works will all Dremel rotary tools to quickly and effectively cut through different materials, including metal and plastic. The kit includes a Mandrel (EZ402) and five cutting wheels (EZ456).

The Dremel® EZ Lock Detail Abrasive Brush is the ideal brush for tackling the challenges of detail cleaning and light sanding applications. Works with the EZ Lock Mandrel or standard 402 mandrel.

To tackle all your sanding and polishing applications the EZ Lock Sanding/Polishing Kit (EZ684-01) includes seven accessories to help get the job done. Specifically included in the kit is three abrasive buffs, two detail abrasive wheels, one cloth polishing wheel and a polishing compound.

For a variety of cutting applications, the EZ Lock Cutting Kit (EZ688-01) contains ten cut-off wheels and a EZ402 Mandrel to help get the job done. Specifically included in the kit is four metal-cutting wheels, three thin-cut wheels and three plastic cutting-wheels.

Dremel gives you the perfect set of sandpaper to take on various applications with this Multi-Max Bulk Pack Sandpaper (Various Grits) (MM80P). It includes 80 grit, 120 grit and 240 grit sandpaper. 

Dremel gives you the perfect set of sandpaper to take on various applications with this Bulk Pack Sandpaper (Various Grits) (MM80W) . It includes 60 grit, 120 grit and 240 grit sandpaper. 

Smoothing and evening rough surfaces is a cinch with the Dremel 60-Grit Multi-Max Diamond Paper (MM900).  Designed to work with the Multi-Max oscillating tool, it's perfect for rough grinding, shaping and smoothing of masonry, stone, cement and mortar.  

The Dremel 3" Multi-Purpose Carbide Saw Blade is designed to work with the Saw-Max and can cut through wood, composites, laminate, flooring, drywall, plastics and more.

The Dremel 3" Metal Cut-Off Wheel Blade is designed to cut through ferrous metals such as steel and nonferrous metals such as brass.

The Dremel 3" Masonry Cut-Off Blade is designed to cut through a variety of masonry materials including stone, slate, cement board, bricks, concrete and cement backer.

The Dremel 3" Tile Diamond Wheel is designed to cut through a variety of masonry materials and most tiles including wall tile, floor tile, porcelain, slate, stone and cement backer board.

The Dremel 3" Multi-Purpose Flush Cut Carbide Wheel is designed to make flush cuts in a variety of materials including wood (soft and hard wood), plywood, composites, laminate flooring, drywall, PVC and plastics.

These 1/2", 60 grit Sanding Bands work with the Dremel® Trio™ rotary tool for shaping wood and sanding inside curves. Pack of 6 bands. (TR408)

These 1/2", 120 grit Sanding Bands work with the Dremel® Trio™ rotary tool for shaping wood and sanding inside curves. Pack of 6 bands. (TR432)