ToolBarn.com

Use this Support Foot (438608) replacement part from Festool to keep your router from tipper when used with a guide rail. It acts as an outrigger and offsets the guide rail height.

Get full use out of your Festool router OF 1010 with this 13.8mm OD/11mm ID Template Guide (484176).

Get full use out of your Festool router with this 10.8mm OD/9mm ID Template Guide (486029). It's 9mm in diameter.

Get full use out of your Festool router with this 17mm OD/15mm ID Template Guide (486030). It's 15mm in diameter.

Get full use out of your Festool router with this 24 mm OD/21 mm ID Template Guide (486031). It's 21mm in diameter.

Get full use out of your Festool router with this 27mm OD/25mm ID Template Guide (486032). It's 25mm in diameter.

Get full use out of your Festool router with this 30mm OD/27mm ID Template Guide (486033). It's 27mm in diameter.

Get full use out of your Festool router with this Angle Arm (486052). It can be used with a copier scanning set to copy workpieces and an edging plate for trimming edges flush.

Get full use out of your Festool router with this Edging Plate (486058). It orients the router on its side for flush trimming operations.

Keep debris to a minimum as you work with your router using this Chip Deflector (486242). Use it with the Festool edging plate to deflect chips into the dust extraction hood.

Get full use out of your router with this Stop Adapter (486314). It fits the parallel stop for AT 65 and AD-AP 65.

Get full use out of your router with this Copier Scanning Set (486534). It attaches to the angle arm to copy workpieces and patterns. The sccanning roller follows contours and guides cutter, and it comes with a shaft and 3 scanning rollers.

Get full use out of your router with this Festool Copy Ring (487016).

Get full use out of your router with this Copy Ring Set Copy Ring Set (487441) from Festool.

Contain pesky dust and particles in your work area with this Dust Extraction Hose Set (488292) from Festool. For use with the CT Dust Extractor, its split hose configuration captures virtually all dust and debris above and below the work table.

Maximize the versatility of your Festool Router and Guide Rail system with this Guide Stop (488752). It adapts the Festool OF 1010 Router for use with the FS Guide Rail System for perfectly guided, straight routing.

Get quick and precise adjustment when using your router with a guide stop or edging plate when you've got this Fine Adjustment (488754) from Festool.

Get full use out of your router with this 8mm Collet with Nut (488755) from Festool.

Extend the support area of your router for better edge trimming with this Extension Table (488756) from Festool. The small center bore eases edge and corner routing, and there's an outrigger handle for additional support.

Get full use out of your router with this 6mm Collet with Nut (488760) from Festool.

Get full use out of your router with this 1/4" Clamping Collet (488761) from Festool.

Have the exact dovetailing accessory you need with this SZ 14 Half-Blind Dovetail Template (488877) from Festool. It's for 9/16"-wide half-blind dovetails in material 5/8" to 25/32" thick, and includes a flanged 17 mm copy ring (490 770) for OF 1010 router.

Have the exact dovetailing accessory you need with this SZ 20 Half-Blind Dovetail Template (488878) from Festool. It's for 25/32"-wide half-blind dovetails in material 13/16" to 1-3/32" thick, and includes a flanged 24 mm copy ring (490 771) for OF 1010 router.

Have the exact dovetailing accessory you need with this FZ 6 Box Joint Template (488879) from Festool. It's for 15/64"-wide half-blind dovetails in material 15/64" to 25/64" thick, and includes a flanged 8.5mm copy ring (490 772) for OF 1010 router.