ToolBarn.com

The Dewalt DWA500dc dust collector attachment keeps dust out of the eyes when drilling overhead. Works with Dewalt SDS Plus Depth Setter (DWA5537DS) to maximize drilling accuracy. 

Learn more about the DEWALT DWA500DC

The Dewalt DWA5537DS depth setter in a major improvement over the traditional depth rod. It allows the user to adjust depth easily when drilling into masonry products.

Learn more about the DEWALT DWA5537DS

Keep the worksite clean and free of dust using this Large Hammer Dust Extraction accessory (Chiseling) (DWH053K) from DEWALT®. Three (3) different dust boots allows the user to match the boot length to the chisel to provide maximum dust extraction.

Learn more about the DEWALT DWH053K

20 Degree Pivot Mode allows for tight space accessibility, Can be used in straight or Pivot Mode, Locking collar allows for straight or angled driving, Qualified for Cordless Impact Tools up to 2000 in/lbs of torque, Fits and works on… Learn more about the DEWALT DWPVTHLD

Designed to work with an impact wrench or Grey Pneumatic's standard or heavy duty impact sockets, these extensions can torque inner and outer cap nuts and flange nuts on heavy duty trucks.

Learn more about the Grey Pneumatic 1dtlextension

Works with Hitachi Super Driver Collated Screw System W6VB3SD, Extends Other Hitachi Super Driver Bits by 15", Learn more about the Hitachi 725430

The Irwin® Speedbor® 6" woodboring bit extension is designed to extend the boring distance of your Speedbor bits. 

Learn more about the Irwin Speedbor 90106

Tapered head design guides the extension through the hole, Recessed black sleeve prevents accidental release, Quick Change design for ease of use on the jobsite, Includes extension only. Does not include drill bit., Learn more about the Irwin Speedbor 90102

For use with flex bits 3/4" and larger, Connection diameter is 5/8", For use with flex bits 9/16" and smaller, Learn more about the Klein Tools 53722

For use with flex bits 3/4" and larger, Connection diameter is 5/8", For use with flex bits 9/16" and smaller, Learn more about the Klein Tools 53723

Convert standard 3/8" round shank bits into Quick-Change compatible hex shank bits with this Quick Change Adapter (QUIK-ADAPT) from Kreg.

Learn more about the Kreg QUIK-ADAPT

Ideal for buffing and sanding, Reaches into tight places, Rotates 360 degrees in any direction, Max speed: 900 RPM, Learn more about the Makita 122177-2

Works with the Makita 6826N Heavy Duty Screwdriver, Easy to install and remove, Learn more about the Makita 152821-7

This Extension Attachment from Makita (193317-9) extends the reach of drill up to 30". Operates at same rate as drill up to 600 RPM with no power loss. Works with Makita drills 6304LR and DA4000LR.

Learn more about the Makita 193317-9

For easy single-handed tool changes, Learn more about the Makita 784871-A

May be used to help cut take-off holes in sheet metal ductwork suspended below floor joists or for take-offs from the side of large trunk lines where reaching up and cutting at 90� is desirable, Incorporates a 1:1 Gear Ratio… Learn more about the Malco Tools HCAD

Reduces thread size of 1-1/4" -7 to 5/8" -11, For use with Diamond Core Bits and extensions, For bits under 2", Learn more about the Milwaukee 48-04-0160

More easily drill holes in floor or ceilings with the Milwaukee 48-06-2860 30" extension for Milwaukee d-handle drills. The extension angles the head to 33 degrees for more comfortable drilling.

Learn more about the Milwaukee 48-06-2860

For use with Milwaukee 1/2" D-Handle Drills, Provides 2 Additional Drilling Speeds, Includes coupling No. 42-90-0175 for 0234-6 and 0244-1, for 50% More Torque or 50% More Speed, Learn more about the Milwaukee 48-06-2871

Adapts Large Hole system heads to work with Spline drive shanks, 7 in. length, Works with the Large Hole System Interchangeable drilling heads, Works with the 11 in. extensions, 48-20-5079, and can be coupled for extra deep drilling applications, Learn more about the Milwaukee 48-20-5075

Acts as a bit guide/center punch, 2-1/2 in. length threaded stud, Works with Large Hole System interchangeable drilling heads, Usable with the available SDS-max or spline shanks, Usable with 11 in. extensions, 48-20-5079, and can be coupled for extra deep… Learn more about the Milwaukee 48-20-5081

Quickly change drill bits without using tools, Impact Rated for durability, Impact rating and compatibility with all 7/16" shanks makes this the most versatile extension on the market, Innovative design accepts all 7/16" shanks - with or without a power-groove,… Learn more about the Milwaukee 48-28-1030

Quickly change drill bits without using tools , Impact Rated for durability , Impact rating and compatibility with all 7/16" shanks makes this the most versatile extension on the market, Innovative design accepts all 7/16" shanks - with or… Learn more about the Milwaukee 48-28-1040

Quickly change drill bits without using tools, Impact Rated for durability, Impact rating and compatibility with all 7/16" shanks makes this the most versatile extension on the market, Innovative design accepts all 7/16" shanks - with or without a power-groove,… Learn more about the Milwaukee 48-28-1050