ToolBarn.com

Freud's 2" Four Wing Slot Cutter produces a precision slot for T-mouldings, spline joints and many other applications. The slot cutters bodies are heat treated for strength and computer balanced for vibration-free operation.

Learn more about the Freud Tools 58-001

For premium performance use with Freud slotting cutters, although compatible with any slotting cutter with a 5/16" bore

Learn more about the Freud Tools 60-001

For premium performance use with Freud slotting cutters, although compatible with any slotting cutter with a 5/16" bore

Learn more about the Freud Tools 60-002

Produce countless woodshop jigs and fixtures with these Mini Traks (KMS75) from Kreg. Each contains t-slots that will capture the head of a standard 1/4" hex bolt, and they can be surface mounted or mounted flush into a 3/8" x 3/4" dado or rabbet. They are easily sizeable to length with a hack saw and conveniently accept any 1/4" hex bolt.

Learn more about the Kreg KMS75

Turn the entire length of your workbench into a clamping station with Kreg's Klamp Trak™ (KKS1020). Made of aluminum, it measures 33-3/4". 

Learn more about the Kreg KKS1020

What's the easiest way to quickly bring your woodworking projects into alignment and center your Kreg Bench Klamp on the joint line?  With these Klamp Blocks™ (KKS1030).

Learn more about the Kreg KKS1030

Add speed and convenience to your woodworking corner with this Multi-Purpose Push Stick (KMA1000) from Kreg. Made of durable impact-resistant plastic, it has an ergonomic easy-grip handle, built-in locking depth gauge and built-in pencil holder, helping you get tasks done in a snap.  For added ease of use, its powerful magnet lets you store it almost anywhere. 

Learn more about the Kreg KMA1000

Kreg gives you reliability and accuracy with this 30" Jig & Fixture Bar (KMS7303). It's ideal for building workshop jigs and fixtures, and it has 6 plugs along the entire length of the bar.  Mounting holes are located every 4 inches , and it's 3/8" tall x 3/4" wide. 

Learn more about the Kreg KMS7303

Building your own router table?  Kreg has the perfect accessory for it with this 48" Combo Trak (KMS7448). It adds flexibility to your table tops and works with your miter gauge, featherboards and other accessories. 

Learn more about the Kreg KMS7448

Produce countless woodshop jigs and fixtures with this 24" Mini Trak (KMS7507) from Kreg. It contains t-slots that will capture the head of a standard 1/4" hex bolt, and it can be surface mounted or mounted flush into a 3/8" x 3/4" dado or rabbet. It's easily sizeable to length with a hack saw and conveniently accepts any 1/4" hex bolt.

Learn more about the Kreg KMS7507

Produce countless woodshop jigs and fixtures with this 36" Mini Trak (KMS7508) from Kreg. It contains t-slots that will capture the head of a standard 1/4" hex bolt, and it can be surface mounted or mounted flush into a 3/8" x 3/4" dado or rabbet. It's easily sizeable to length with a hack saw and conveniently accepts any 1/4" hex bolt.

Learn more about the Kreg KMS7508

Produce countless woodshop jigs and fixtures with this 48" Mini Trak (KMS7509) from Kreg. It contains t-slots that will capture the head of a standard 1/4" hex bolt, and it can be surface mounted or mounted flush into a 3/8" x 3/4" dado or rabbet. It's easily sizeable to length with a hack saw and conveniently accepts any 1/4" hex bolt.

Learn more about the Kreg KMS7509

Get a router fence that no other fence compares to with Kreg's 36" Precision Router Table Fence (PRS1010). Made of durable aluminum, its Magnified Precision Lens Cursor can be used instead of a tape measure and pencil to obtain more accurate measurements. It's designed to maintain the highest standards of precision and rigidity in its class.

Learn more about the Kreg PRS1010

Take your cabinetry projects to the next level using the Precision Beaded Face-Frame System (PRS1200) from Kreg. This set adds detail, richness and value to your cabinetry work and is less expensive than other woodworking supplies that give you the same results.  Using it gives you more accurate cuts and a better finished look, and it's perfect for your home woodworking shop.

Learn more about the Kreg PRS1200

Ready to start working quickly and conveniently on your woodworking projects? Kreg has just what you need with this Precision Router Table Lift (PRS3000). The Quick-Lift and tool-less micro adjustment wheel allow you to make fast bit changes and precise depth adjustments on the fly, saving you time and energy as you work.

Learn more about the Kreg PRS3000

Applying consistent and optimum pressure while you work on woodworking projects is simple with this True-FLEX Featherboard-Single (PRS3010) from Kreg. Made of durable plastic, it's designed to withstand years of use in your woodworking shop.

Learn more about the Kreg PRS3010

Applying consistent and optimum pressure while you work on woodworking projects is simple with this True-FLEX Featherboard-Twin Pack (PRS3020) from Kreg. Made of durable plastic, it's designed to withstand years of use in your woodworking shop.

Learn more about the Kreg PRS3020

Create a level surface on virtually any router table with this Precision Router Table Insert Plate (PRS3030) from Kreg. Designed to mount easily, it has unique bottom-up levelers for 100% level surface. It features 8 adjustable points of contact for leveling precision, 4-corner lock-downs for stability and locating tabs for easy installation.

Learn more about the Kreg PRS3030

Creating a level surface on your router table with an insert plate is easy with these Precision Router Insert Plate Levelers (PRS3040) from Kreg. They eliminate the need for a supporting rabbet and work with router tables up to 1-1/2" thick. 

Learn more about the Kreg PRS3040

Make your Kreg Universal Steel Stand conveniently mobile using this 3" Dual-Locking Caster (Set of 4) (PRS3090). It includes 4 heavy duty casters with a dual locking mechanism that protects against caster roll and pivot.

Learn more about the Kreg PRS3090

Eliminate the unintentional power-on of your router table with the Multi-Purpose Router Table Switch (PRS3100) from Kreg. It's compatible with the Kreg router table and precision benchtop router table.

Learn more about the Kreg PRS3100

Making adjustments to your router tables, shaper and table saws is quick, easy and precise when you use this Precision Router Table Setup Bar Set (PRS3400) from Kreg. The unique design straddles the router bit and saw blade, enabling more precise height adjustment.  Made of soft aluminum to prevent damage to your router bit and saw blade, it includes 7 sizes. 

Learn more about the Kreg PRS3400

Router Accessories Learn more about the Makita MAKRTRGUIDE

Complete 1/4" collet and locking nut assembly for use with Milwaukee routers (series 5615, 5616, 5619, and 5625)., For use with 1/4" shank router bits, Self-release feature prevents bits from jamming in the assembly, 8-segment design ensures maximum bit to… Learn more about the Milwaukee 48-66-1015