ToolBarn.com

Complete kit of everything needed for two-stage filtration on Turbo I vacuums, Allows clean up of smaller particulate dust, Do not use with the cloth filter bag in place, Learn more about the Fein FBK-1

Complete kit of everything needed for two-stage filtration on Turbo III vacuums, Allows clean up of smaller particulate dust, Do not use with the cloth filter bag in place, Learn more about the Fein FBK-3

Complete kit of everything needed for two-stage filtration on Turbo II vacuums, HEPA filter captures a greater quantity of smaller particles than standard vacuum filters, Good choice for cleaning areas for people with allergies or other health concerns, Do not… Learn more about the Fein FBK-HEPA

This Fein Turn Screw (TII3001) works with a flange to attach a 1-micron or HEPA filter on to a vacuum. It's designed for use with the Fein vacuum No. 9-55-13. It requires the flange, which is sold separately.

Learn more about the Fein TII3001

Get full use out of your Fein vacuum with this Flange for Cartridge Filter for Dust Extractor Vacuums (TII3002). It works with the Fein 9-55-13 vacuum, and is also for use with HEPA and 1-micron filters.

Learn more about the Fein TII3002

Get full use out of your Festool dust extractor with this Bevel Ended Nozzle (411810). Made of flexible rubber material, it enables you to get into hard-to-reach spaces. It measures 7-1/2" long.

Learn more about the Festool 411810

Increase the extraction efficiency of your Festool dust extractor with this Chip Guard (437307). It can be used as a replacement for an edge guide.

Learn more about the Festool 437307

Add extra cleaning capability to your Festool dust extractor with this Universal Brush Extractor (440403). Made of plastic, it measures 4-11/16" x 1-5/8" and has a 1-7/16" diameter.

Learn more about the Festool 440403

Add extra cleaning capability to your Festool dust extractor with this Suction Brush (440404). Made of plastic, it has a 2-13/16" diameter.

Learn more about the Festool 440404

Easily clean upholstery and fabric with this Upholstery Brush (440406). At 4-11/16" long, it adds an extra cleaning capability to your Festool dust extractor, and fits 27 mm and 36 mm hoses and tubes.

Learn more about the Festool 440406

Clean hard-to-to reach spots with this Festool Non-Antistatic Plastic Extension Tube (440412). It comes in 2 pieces that measure 38" in length each. Made of plastic, they are 50mm in diameter.

Learn more about the Festool 440412

Get full use out of your Festool OF 2000 dust extractor with this Dust Hood Replacement (444376). It helps contain dust while you vacuum.

Learn more about the Festool 444376

Increase the extraction efficiency of your Festool dust extractor with this Chip Guard (445497). It can be used as a replacement for an edge guide.

Learn more about the Festool 445497

Clean hard-to-reach spots with your dust extractor using this One-Piece Anodized Aluminum Extension Tube (447599). Made of aluminum, it measures43-1/2" long and is 50mm in diameter.

Learn more about the Festool 447599

Effectively clean carpets and hard surfaces with this Festool Turbo Suction Brush (450644). It has impressive suction-activated rolling brushes and requires a 36mm hose.

Learn more about the Festool 450644

Get full use out of your Festool CT dust extractors with this Service Unit Ve-Ct (452797). It regulates oil pressure and condensation to keep air tools running optimally, extending the life of the tool.

Learn more about the Festool 452797

Convert your standard Festool CT dust extractor into a compressed air auto-start version with this Compressed Air Module (452829).It's easy to install and is for use with the Festool IAS Air Sanding System.

Learn more about the Festool 452829

Get full use out of your Festool CT Dust Extractors and cleaning sets with this 1-1/16" x 11.5' Non-Antistatic Hose (452877). Designed as an economical option for use with non-antistatic dust extraction systems or vacuums, its rotating connector prevents twisting and kinking, helping you work more efficiently.

Learn more about the Festool 452877

Get full use out of your Festool CT Dust Extractors and cleaning sets with this 1-1/16" x 11.5' Antistatic Hose (452878). It helps you work cleaner by preventing dust from accumulating on the exterior of the hose while preventing static discharge or shocks. It also prevents clogging due to particulate buildup inside the hose.

Learn more about the Festool 452878

Get full use out of your Festool CT Dust Extractors and cleaning sets with this 1-1/16" x 16.5' Non-Antistatic Hose (452879). For use with non-antistatic dust extraction systems or vacuums, it fits and adapts to all Festool dust extractors and all Festool cleaning sets.

Learn more about the Festool 452879

Get full use out of your Festool CT Dust Extractors and cleaning sets with this 1-1/16" x 16.5' Antistatic Hose (452880). It helps you work cleaner by preventing dust from accumulating on the exterior of the hose while preventing static discharge or shocks.

Learn more about the Festool 452880

Get full use out of your Festool CT Dust Extractors and cleaning sets with this 1-15/16" x 11.5' Non-Antistatic Hose (452881). For use with non-antistatic dust extraction systems or vacuums, it fits and adapts to all Festool dust extractors and all Festool cleaning sets.

Learn more about the Festool 452881

Get full use out of your Festool CT Dust Extractors and cleaning sets with this 1-7/16" x 11.5' Antistatic Hose (452882). For use with non-antistatic dust extraction systems or vacuums, it fits and adapts to all Festool dust extractors and all Festool cleaning sets.

Learn more about the Festool 452882

Get full use out of your Festool CT Dust Extractors and cleaning sets with this 1-15/16" x 16.5' Non-Antistatic Hose (452883). For use with cleaning sets and non-antistatic dust extractors, it comes with a rotating connector and reducing sleeve.

Learn more about the Festool 452883