Bosch Tools
DEWALT Tools
Hitachi Tools
Ingersoll Rand Tools
Makita Tools
Milwaukee Tools
Porter Cable Tools
Skil Tools
Related Products
Check items to add to the cart or select all
Compare Products
You have no items to compare.
My Cart
You have no items in your shopping cart.
Amana Tool MD10-105 10" x 100 Tooth A.G.E. Non-Ferrous Saw Blade
Features
Product Description
The negative hook angle, triple-chip grind and thick plate combine to produce a superior finish. Use as coolant or blade wax and clamp down the work piece when cutting non-ferrous metals. The blade can be used to cut other “difficult” materials such as plastic, PVC tubing and fiberglass.
- Carbide Tipped
- TCG (Triple Chip Grind)
Warning: NEVER attempt to cut ferrous metals (steel, iron, etc.) with these saw blades. Non-Ferrous blade is not to be used on multi-purpose cut-off saws or gas power saws, unless saw has a guard that covers both the upper half an d the lower half of the blade completely. The guard must extend to the lowest point of the cutting teeth on the bottom of the blade. Consult machine owner’s manual and follow all instructions and safety procedures - including wearing safety goggles at all times while working with this blade. NOTE: Due to the rough applications for which these blades may be used, they are not guaranteed.
In The Box
In The Box
One (1) 10" x 100T A.G.E. Non-Ferrous Saw Blade
Applications
Applications
- For use in a miter box and single/double miter machines
- Perfect choice for picture frame and millwork shops
- Excellent results when used on crosscut and plywood
- Good results when used on chipboard, MDF and plastic
Specifications
Additional Information
| Manufacturer's SKU | MD10-105 |
|---|---|
| UPC / ISBN | 738685610053 |
| Brand | Amana Tool |
| Additional | No |
| Safety Info | Warning: NEVER attempt to cut ferrous metals (steel, iron, etc.) with these saw blades. Non-Ferrous blade is not to be used on multi-purpose cut-off saws or gas power saws, unless saw has a guard that covers both the upper half an d the lower half of the blade completely. The guard must extend to the lowest point of the cutting teeth on the bottom of the blade. Consult machine owner’s manual and follow all instructions and safety procedures - including wearing safety goggles at all times while working with this blade. NOTE: Due to the rough applications for which these blades may be used, they are not guaranteed. |
| Shipping Weight | 1.0000 |
| Blade Diameter | 10 Inches |
| Teeth Per Inch | No |
| Arbor Size | No |
| Kerf | No |
| Hook Angle | No |
| Application | No |
| Condition | New |
| Product Weight (lbs.) | 1.00 |
| Manufacturer's Warranty | Product Defects Only |
| Return Policy | Unopened Only, 30 Days |
| Addl Specs |
|
| Video | No |
