ToolBarn.com

Not recommended to cut stock over 3/4" without the use of a stablizer, Thin kerf blades are designed for miter smooth cuts, less drag on bearings and brake and reduces stock loss on expensive woods and veneer plywoods, Can… Learn more about the Amana Tool TB10801

Thin kerf blades are designed for miter smooth cuts, less drag on bearings and brake and reduces stock loss on expensive woods and veneer plywoods, TC grind can also be used for cutting thin plexiglas, masonite and plastics, Not… Learn more about the Amana Tool TB10100

Designed to easily cut through steel studs, steel sheets, metal rods, steel pipes, channels and rebar.

Learn more about the Amana Tool STL355-72

Fits Porter-Cable and Makita portable trim saws, Learn more about the Amana Tool RM-438

The Amana® 10" X 40 Tooth Prestige blade is the ideal multipurpose blade the heavy plate with copper plugs help to eliminate vibration while the precision ground carbide teeth give a clean precise cut.

Learn more about the Amana Tool PR1040

For miter joint cutting in softwood and hardwood, moldings and picture frames, Use with DeWALT and Hitachi saws, Learn more about the Amana Tool MS12800

This is a general purpose blade which provides good results ripping and crosscutting in a variety of materials.

Learn more about the Amana Tool MD12-480

Special grind, minimal run-out and tight side clearances for "GAP-FREE" miters every time , Blades are stiffer and provide clean burr-free cuts in wood , For use in a miter box and single/double miter machines , Designed especially for… Learn more about the Amana Tool MD12-106

These blades are designed especially for glass-smooth compound miter cuts in moldings & picture frame stock.

Learn more about the Amana Tool MD12-105

The special carbide formulation and blade geometry makes this blade ideal for cutting aluminum and non-ferrous metal bars such as copper, brass, bronze and lead. Also, good for cutting relatively thick-walled extrusions and profiles.

Learn more about the Amana Tool MD10-805

This blade is designed for cutting melamine on saws without a scoring unit.

Learn more about the Amana Tool MD10-803

This blade is specifically designed for clean cuts in plywood and single-sided laminates.

Learn more about the Amana Tool MD10-801

This blade is designed for smooth crosscuts in a variety of materials from hardwoods, softwoods and sheet stock including chipboard.

Learn more about the Amana Tool MD10-800

This blade is specifically designed for clean cuts in plywood and single-sided laminates.

Learn more about the Amana Tool MD10-601

These blades are designed especially for glass-smooth compound miter cuts in moldings & picture frame stock.

Learn more about the Amana Tool MD10-600

In many custom woodworking shops one blade must cut a wide variety of materials.

Learn more about the Amana Tool MD10-500

This is a general purpose blade which provides good results ripping and crosscutting in a variety of materials.

Learn more about the Amana Tool MD10-400

This blade is specifically designed for efficient, smooth ripping.

Learn more about the Amana Tool MD10-240

The special carbide formulation and blade geometry makes this blade ideal for cutting aluminum and non-ferrous metal bars such as copper, brass, bronze and lead. Also, good for cutting relatively thick-walled extrusions and profiles.

Learn more about the Amana Tool MD10-105

Learn more about the Amana Tool MB10800

2° negative hook angle reduces the tendency of chip welding or melting of material, Learn more about the Amana Tool LB10801C

Emcompasses the same features as their regular melamine blade 'MB' & 'MSB' Series, but the long lasting Ditec™ carbide tips, Recommmended for anyone who cuts melamine on a regular basis, Telfon® coated, Learn more about the Amana Tool DT12840

Has serrations on the outside diameter edge to provide a better grip and fit, Helps reduce a 1" diameter to a 5/8" diameter, Learn more about the Amana Tool BU-100

To cut groove and dados from 1/8" through 13/16" or larger than 13/16" with additional chippers, Outside saw blade feature hollow-ground plates for proper clearance, and alternate top bevel (ATB) grind with every sixth tooth flat ground (FT), Standard… Learn more about the Amana Tool 658030-AK