ToolBarn.com

NT32AE2 accepts 5/8" to 1-1/4" 18-gauge fasteners, New selective actuation switch lets the user easily select bump fire or sequential fire modes, At only 2.0 lbs, it is well balanced and lightweight to make finish work a breeze, Elastomer grip… Learn More

Accepts 5/8" to 2" 18-gauge fasteners, The new selective actuation switch lets the user easily select bump fire or sequential fire modes, At only 2.2 lbs, it's well balanced and lightweight to make finish work a breeze, The elastomer grip… Learn More

Nailer, Equipped with the same output mechanism as the NR83A that well reputed with its rapid driving and quick response, good balance and light weight for easy one-handed operation, Two-piece magagine - the body handle is fixed to the magagine… Learn More

Powerful 15 Amp induction motor for quiet operation and extended use as compared to universal motor products, Contractor preferred 4-gallon twin stack features a large finned head pump and metal cooling fan to keep the pump cool during tough applications,… Learn More

4.0 cfm at 90 psi for multiple operations, Line regulator with gauge for immediate use at worksite, O-ring on drain-cock makes valve easy to open and close, Direct drive electric motor provides durability and long life, Vertically stacked twin tanks,… Learn More

10.6cfm at 125psi for multiple operations, Cast iron pump with oil splash lubrication and ball bearing mounted crank shaft for durability, 8-gallon, large capacity twin tank capable of running multiple nailers, Belt drive fly wheel lowers pump rpm for longer… Learn More

Powerful Induction Motor - Heavy-duty induction motor for extended use, Oil free pump for minimum maintenance and worry free finish applications, Control panel and complete shrouding for safety and durability, 2.6 cfm at 90 psi, 135 psi max working… Learn More

8 gallon twin tank receivers capable of running multiple nailers, Pneumatic idle control and throttle for added safety, 5.5hp, industrial OHV Honda engine for dependability and power, Cast iron pump with oil splash lubrication and ball bearing mounted crank… Learn More

Works with Hitachi Super Driver Collated Screw System W6VB3SD, Extends Other Hitachi Super Driver Bits by 15", Learn More

Super drive bits work with Superdrive® collated screw guns, Has a length of 7 Inches and a #2 Phillips tip, Learn More

Learn More

Learn More

Learn More

Learn More

The SuperDrive LOX system is a revolutionary new bit system that features eight points of contact, Using the LOX system, it is not uncommon to drive as many as 25,000 screws before replacing the bit, Learn More

Hitachi's new SuperDrive collated screw system has been improved for the professional subfloor, decking and dry-wall installer. The 19-inch extension handle lets the user install screws in a standing position to dramatically reduce fatigue.

Learn More

Hitachi's W6VB3SD SuperDrive collated screw system has been improved for the professional subfloor, decking and dry-wall installer. The 19-inch extension handle lets the user install screws in a standing position to dramatically reduce fatigue

Learn More

This motor provides high torque for those tougher cutting and grinding applications, A slim body design with a soft touch grip provides greater comfort and control, The externally accessible carbon brushes allow for easy maintenance and prolonged tool life, Learn More

Tool body is compatible with all Hitachi 18V Lithium Ion Batteries, This motor provides high torque for those tougher cutting and grinding applications, A slim body design with a soft touch grip provides greater comfort and control, The externally accessible… Learn More

The 3.0 Ah lithium-ion batteries allow for longer run time in between charges and lighten the overall weight of the tool, The two-step speed switch power mode gives you control over drilling speed allowing for fast and efficient drilling in… Learn More

tool body is compatible with all Hitachi Lithium Ion NiCd and NiMH 18V batteries, The electro-neumatic mechanism produces 1 ft/lb of impact energy, The compact and lightweight design is perfect for overhead drilling, Features a convenient 5-position belt hook with… Learn More

Hitachi lithium-ion technology provides overcharge, over-discharge and over current protection for long battery life, 3.0 Ah LI batteries run longer and weigh less than traditional NiCd and NiMH batteries, 2-step speed switch: power mode for fast and efficient drilling in… Learn More

3.0Ah Li-Ion batteries offer three times the life at half the weight, Universal charger that charges 7.2 - 18V Li-Ion, NiMH, and NiCd batteries, Powerful 18V hammer drill with 570 in/lbs of torque, Heavy-duty 18V reciprocating saw features a… Learn More

DV18DL Hammer Drill, Class leading 570 in/lbs of Torque to power through the toughest jobs, 2 step speed switch provides 4 speed settings for ultimate control, Externally accessible carbon brush for quick and easy brush changes, Convenient 5-position belt hook… Learn More