ToolBarn.com

All Tapcon screws have a Climaseal&trade coating that provides extended corrosion resistance, The anchor that cuts its own threads into concrete, brick, or block, Maximum performance is achieved because the Tapcon Anchor, the Condrive Installation Tool, and the carbide-tipped Tapcon… Learn more about the Red Head 7904050

The Red Head® A100 Injection Tool is designed to dispense A7 type Acrylic Adhesive from the 10 ounce cartridges.

Learn more about the Red Head A100

The Red Head® A101 Injection Tool is designed to dispense A7 type Acrylic Adhesive from the 8 ounce cartridges.

Learn more about the Red Head A101

Acrylic Adhesive Dispenser, Reusable Material Metal, Color Black, Use With 28 oz Cartridge, Learn more about the Red Head A102

Incredibly fast dispensing and rod installation times, Significantly faster curing times, Easy to use (no-heating) even at freezing cold temperatures, Requires less adhesive, Learn more about the Red Head A710

The acrylic resin and hardening agent are completely mixed as they are simultaneously dispensed, directly into the anchor hole. A7 can be used with threaded rod or rebar.

Learn more about the Red Head A728

The acrylic resin and hardening agent are completely mixed as they are simultaneously dispensed from the dual cartridge through a static mixing nozzle, directly into the anchor hole. A7 can be used with threaded rod or rebar.

Learn more about the Red Head A78

Brush may be used up to 50 holes depending on concrete strength, Brushes required for installation of #4, and #8 rebar are available with lead time, Learn more about the Red Head BW-012

Brush may be used up to 50 holes depending on concrete strength, Brushes required for installation of #4, and #8 rebar are available with lead time, Learn more about the Red Head BW-034

Brush may be used up to 50 holes depending on concrete strength, Brushes required for installation of #4, and #8 rebar are available with lead time, Learn more about the Red Head BW-038

Fast change from drilling to driving, Eliminates need to change out chuck and bits, Eliminates need for two tools, Special nut driver is recessed for torque control to reduce head breakage, Includes bits for all sizes hex and phillips head,… Learn more about the Red Head C-1000

C6 Fast Curing Epoxy from RedHead for oversized holes and diamond cored holes. 18 fl oz. cartridge. (C618)

Learn more about the Red Head C618

Acrylic adhesive dispenser for use with C6-18 ounce and G5-22 ounce cartridges. 

Learn more about the Red Head E102

Take on various applications with these 1/2" OD Epcon G5 and C6 Injection Nozzle, single nozzle from Red Head.

Learn more about the Red Head E24XL

The E-Z Ancor is a one-piece self-drilling anchor designed for optimal holding performance in gypsum wallboard. Available in zinc or high strength engineered plastic (non-conductive). Ideal for 3/8", 1/2" and 5/8" gypsum wallboard Anchor accepts #8A or AB screws. Learn more about the Red Head EZ100

Fast, no pre-drilling, Easy, just use #2 phillips bit, Clean and neat, tri-cut point drills a small hole and seats flush, Corrosion resistance, Removable, easily backed out of wallboard, Breakaway point for easy usage when cavity is shallow, Learn more about the Red Head EZPPL100

Anchor diameter equals hole diameter, Available in hex head and six other head styles, Available 1/4-3/4" diameter up to 6-1/4" length, Zinc Plated carbon steel and 304 stainless steel, Provides full 360 degree hole contact over large area and… Learn more about the Red Head FS1411

Anchor diameter equals hole diameter, Available in hex head and six other head styles, Available 1/4-3/4" diameter up to 6-1/4" length, Zinc Plated carbon steel and 304 stainless steel, Provides full 360 degree hole contact over large area and… Learn more about the Red Head FS1420

Anchor diameter equals hole diameter, Available in hex head and six other head styles, Available 1/4-3/4" diameter up to 6-1/4" length, Zinc Plated carbon steel and 304 stainless steel, Provides full 360 degree hole contact over large area and… Learn more about the Red Head FS1430

Anchor diameter equals hole diameter, Available in hex head and six other head styles, Available 1/4-3/4" diameter up to 6-1/4" length, Zinc Plated carbon steel and 304 stainless steel, Provides full 360 degree hole contact over large area and… Learn more about the Red Head FS1440

Anchor diameter equals hole diameter, Available in hex head and six other head styles, Available 1/4-3/4" diameter up to 6-1/4" length, Zinc Plated carbon steel and 304 stainless steel, Provides full 360 degree hole contact over large area and… Learn more about the Red Head FS3826

Anchor diameter equals hole diameter, Available in hex head and six other head styles, Available 1/4-3/4" diameter up to 6-1/4" length, Zinc Plated carbon steel and 304 stainless steel, Provides full 360 degree hole contact over large area and… Learn more about the Red Head FS3840

Anchor diameter equals hole diameter, Available in hex head and six other head styles, Available 1/4-3/4" diameter up to 6-1/4" length, Zinc Plated carbon steel and 304 stainless steel, Provides full 360 degree hole contact over large area and… Learn more about the Red Head FS3850

Anchor diameter equals hole diameter, Available in hex head and six other head styles, Available 1/4-3/4" diameter up to 6-1/4" length, Zinc Plated carbon steel and 304 stainless steel, Provides full 360 degree hole contact over large area and… Learn more about the Red Head FS3860