Power-driven table raises and lowers simply and quickly
Large 24" X 35 1/2" precision-ground table is equipped with two adjustable bed rolls located directly below feed rolls for smooth, positive feeding - Bed roll height can be quickly adjusted from the front of the machine to suit variations in planing condidtions
Fine adjustments are made using the convenient hand wheel
Lumber gauge enables operator to measure stock thickness quickly
Rear pressure bar maintains even force on planed stock - outfeed roll helps maintain positive feeding under all conditions
Efficient, fully accessible drive system makes it easy to change feed speed by simply move V-belt from one pulley step to the other
Standard equipment dust chute has a 6" opening for easy connection to a central dust collection system
Outfeed roll is driven through feed gear box and supplies power to the infeed roll and table raising and lowering gear box mechanism - Heavy duty chains and sprockets are used throughout the system
Spacious table raises and lowers on four precision, self-locking screws - Solid steel gibs keep table in perfect alignment regardless of thickness of cut - Dust-proof rubber boots protect screws from abrasive dust and moisture
Complete cutterhead and feed group are modulary mounted to the machine frame, including seperate bearing blocks for cutterhead - This allows the entire cutterhead to be removed without disturbing feed system settings - System also includes twelve 2" wide sectional chip breakers for full width, even pressure on wide, tapered stock - Full width anti-kickbacks provide added safety
Specs
Feed Rolls
Spiral in-feed: 2.75" dia.
Outfeed: 2.75" dia., Adjustable
Table bed rolls (2): Adjustable
Capacities
Max. width of stock: 24.8"
Max. thickness of stock: 9.38"
Min. thickness of stock: 1/8"
Depth of Cut
Maximum: .39"
Full width planing: 1/8"
Min. length of stock: 11"
Cutterhead
Standard knife: 4
Diameter: 4.72"
Speed: 5000 rpm
General
Table Size: 24 3/4" X 35 1/2"
Table Rise and Fall: Power driven fine adjustment by handwheel
Chip Chute Opening: 6"
Max. Width of Stock (in.): 24.8
Feed Rate (ft./min.): 25/46
Motor (RC-63D)L: 10HP, 200, 220/440V (wired 220V), three-phase
