Delta 28-348G 14" Metal-Cutting & Wood-Cutting Band Saw (1-1/2 HP, 200-230/460 Volt LVC Three Phase Motor)

Home /
14" Metal-Cutting & Wood-Cutting Band Saw (1-1/2 HP, 200-230/460 Volt LVC Three Phase Motor)

Delta 28-348G

Normally Ships in 3 - 5 business days

$1,999.99

Add Items to Cart Qty:

Found in the following categories:

Micrometer adjustment for ball bearing blade support and blade guide blocks assure superior accuracy
Multi-step pulley for changing speeds for different metal cutting operations
Full 16" x 16" cast-iron table tilts 45 degrees right and 9 degrees left for beveling operations
Capacity to cut stock up to 6 1/4" thick
Quick-stop table presets with table turret stop system
Side take-out slot for blade permits use of solid front trunnion (not split for blade removal) located directly under work load - Rip fence guide rails need not be removed when changing blades
4" integral dust port for woodcutting operations
Lower blade guides have safe, accurate, micrometer adjustment - Lower guides angled to support blade to within 3/4" of table work surface - assures accurate cutting
Nine-spoke, precision-balanced wheels
Veri-Set&trade index tensioning lever
Oil bath transmission for efficient transfer of power

Manufacturer's SKU	28-348G
Manufacturer	Delta
Shipping Weight	393.0000
Condition	New
Manufacturers Warranty	5 Years
Return Policy	30 Days
Addl Specs	Capacities Frame to blade: 13 3/4" Under guide and wheel: 6 1/4" Under guide and wheel (with 28-984 height attachment): 12 1/4" Speed with 1725 rpm motor: 40, 60, 85, 115, 160, 220, 335, 3000 SFPM Table Size: 16" x 16" Groove: 3/8" x 3/4" Tilt: 45 degrees R 9 degrees L Height from floor: 42 3/4" Blade Width: 3/4" maximum Length: Maximum: 94" Minimum: 91 1/2" Standard: 93 1/2" Length (with 28-984 ht. attachment): Maximum: 106" Minimum: 103 1/2" Standard: 105" General Motor: 1 1/2 HP Capacity (ht. under guide): 6 1/4", 12 1/4" with No. 28-984 Height Attachment installed Height: 65 1/2" Width with enclosed stand: 25" Front to rear: 17 1/2"