Dremel Tile Cutting Bit
TIPS: For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto. Start at a 45-degree angle when cutting into a piece of material. Do not use this bit to cut ceramic floor tile.
- A high-speed cutter mounted on a 1/8" steel shank
- Use to shape ceramic wall tile around bathroom and kitchen fixtures
- Suitable for ceramic wall tile, cement board and plaster
- Not suitable for use on floor tile
In The Box
One (1) Cutting Bit