ToolBarn.com

The Heavy Duty Hammer Tacker (DWHTHT450) is a great addition to any toolbox. The tacker features a lightweight die -cast aluminum housing design, anti-jam magazine, heavy-duty stapling mechanism, surface guard and is ergonomically designed.

Learn more about the DEWALT DWHTHT450

The Heavy Duty Staple and Brad Tacker (DWHTTR350) is an essential item to have in your toolbox. The staple and brad tacker features an easy-squeeze technology, anti-jam magazine, heavy-duty ratchet mechanism and a lightweight die-cast aluminum housing design.

Learn more about the DEWALT DWHTTR350

Learn more about the Duo-Fast 501870

Fully adjustable power setting, Lightweight, 1.8 lbs., Rear loading magazine, Wire Size: .050", Uses 5000 series fasteners, Learn more about the Duo-Fast CS-5000

Rear loading magazine, Uses 5000 series fasteners, Lightweight, 2 lbs., Wire size: .050", 168 staple load capacity, Durable for heavy-duty use, Learn more about the Duo-Fast HT-550

Take on a variety of applications with this Wide Crown Fine Wire Stapler (HT-755) from DuoFast. Its hammer style design is durable, lightweight and inexpensive. It features a rear loading magazine and a 168 staple capacity.

Learn more about the Duo-Fast HT-755

Take on heavy duty tasks with this Fine Wire Hammer Tacker and  Box of 1/4" Leg x 3/8" Crown Staples (HT31008). It has a rubber grip handle for operator comfort and to reduce impact vibration, and is also lightweight.

Learn more about the Duo-Fast HT31008

The ISM HC100T manually operated box stapler is designed to drive 3/4" leg 1-3/8" crown A series carton staples. Learn more about the ISM Fastening Systems HC100T

Slugs are split inside for easy removal, Maximum capacity of 10 gauge mild steel, Also cuts aluminum, fiberglass and plastic, Punches holes cleanly and accurately, Set includes 1/2" or 3/4" punch and die with draw stud, Learn more about the Klein Tools 53727

3 Nose pieces (1/8", 5/32", 3/16"), Long Stroke, Short "Ratchet Action" Power Stroke, Learn more about the Malco Tools 2IN1

Rugged steel construction with black paint finish and comfortable vinyl grip, Secure handle latch makes this tool easy to fit in pouch or pocket, Four rivet nose pieces: 3/32, 1/8, 5/32, 3/16" store in handle, Not for use with 5/32"… Learn more about the Malco Tools CR18

Ergonomic D-Grip Handle, Improved Design Eliminates Jamming, Solid One-Piece Aluminum Magazine, Dual-Barbed Staples Offer Superior Holding Power, Cleaner Staple Feed, Smoother Stapling Action, Learn more about the Malco Tools FBSN

The PSW1 Pex to Wood Stapler by Malco was specially designed for in-floor radiant heating installations. The solid one-piece aluminum magazine stands up to any rugged job-site environment. And the leaf spring controlled stop automatically adjusts to the staple size and helps guide it through the fastening mechanism without risk of jamming or deforming the staple. The magazine holds a load of 25 staples that are joined together with a discreet plastic weld that allows staples to separate cleanly as they are engaged by the fastening mechanism.

Learn more about the Malco Tools PWS1

No tools are required to assemble, The PEX Tubing Uncoiler takes up very little space in a truck or van, The entire unit stores in a steel-reinforced plastic case measuring 40" x 17" x 5" (102 x 43 x 13… Learn more about the Malco Tools UC1

The Stinger cap stapler is the first hammer tacker to shoot both staples and caps, Features a lightweight and easy to use design to maximize productivity while maintaining comfort, The Stinger hammer stapler drives 3/8" leg A-11/T-50 series staples, Ideal… Learn more about the   136400

The Spotnails TEBO2 TEBO Decker™ kit is a patented tool that is made to attach deck boards to the joists without face nailing at a speed comparable to a screw gun. In addition to the speed and the hidden fasteners, the TEBO Decker works with most woods and composites used for decking.

Learn more about the SpotNails TEBO2

The Stanley MR100CG Contractor Grade Riveter has a long handle that makes the riveter easy to squeeze. It has a rugged, contractor-grade die-cast metal construction for long life. The MR100CG is designed for stainless steel rivets in marine applications. The riveter is also equipped with removable ejector spring.

Learn more about the Stanley MR100CG

The Stanley MR33C spring-loaded handle ejects rivet stem automatically.  Slim nose design fits in difficult to reach places.  The long handle makes riveter easy to squeeze. 

Learn more about the Stanley MR33C

The Stanley MR55C5 spring-loaded handle ejects rivet stem automatically. The All steel construction is made for long lasting durability. Extra nose pieces and wrench are conveniently stored in handle.  The long handle makes riveter easy to squeeze.

Learn more about the Stanley MR55C5

The Stanley MR77C sets rivets at right angle or straight on, with a simple twist of rivet head.  The MR77C has a rugged die cast metal construction for long life.  Extra nose pieces and wrench are conveniently stored in handle.  The long handle makes riveter easy to squeeze.

Learn more about the Stanley MR77C