ToolBarn.com

1/16" Grads, Learn more about the L.S. Starrett T36

1/16" Grads, Learn more about the L.S. Starrett T24

One-piece tempered steel, 24" x 2" body and 16" x 1 1/2" tongue, Clear coating for rust resistance, Face and back permanently stamped with 1/8" graduations, Convenient hang hole, Learn more about the L.S. Starrett FS-24

A pair of these fixtures clamped to a carpenter`s framing or rafter square forms a handy gage for laying out stair stringers, hip, valley, and other rafter cuts plus many other unusual cuts. The No. 470 has a smaller area that contacts the square blade. It is convenient, small, and lower in cost. Learn more about the L.S. Starrett 470

A pair of these fixtures clamped to a carpenter`s framing or rafter square forms a handy gauge for laying out stair stringers, hip, valley, and other rafter cuts plus many other unusual cuts.

Learn more about the L.S. Starrett 111

Have everything you need with this Stanley 3-Pack with Multi-Tool, Utility Knife and Screwdriver (95-650-K). The kit includes a 12-in-1 multi-tool, QuickSlide utility knife and a 6-in-1 screwdriver so you're ready for any task or repair.

Learn more about the Stanley 95-650-K

Stanley combines accuracy and precision with this 12" Premium Etched Blade Combination Square (46-123). The durably etched, hard-chrome-plated bladed are rust resistant and made to last, plus it has a yellow die-cast handle for high visibility.

Learn more about the Stanley 46-123

The high-quality hardened steel provides durability and long life, Markings include Essex board measure, octagon scale, brace scale, and rafter table, Durable, embossed graduations and figures for easy reading, Buffed finish with a clear lacquer that resists rust, Learn more about the Stanley 45-910

Carpenter Square Learn more about the Stanley 45-500

This 16" x 24" Aluminum Carpenter Square from Stanley helps get any project done quickly and accurately. Made of high-quality aluminum for maximum durability, it has embossed graduations and figures for easy reading. Plus, it provides helpful reference conversion tables and has a protective lacquered coating that helps resist corrosion.

Learn more about the Stanley 45-300

Rafter Square measuring 16" x 24" Learn more about the Stanley 45-011

Silver anodized finish with black epoxy paint numerals for long wear and legibility, Metric measurements, Square is 1/8" thick, Made in the U.S.A., Actual product may differ slightly from image, Learn more about the Marshalltown 16338

Versatile T-square adjusts from 0 to 360 degrees, Heavy-duty 2 X 1/4 blade, Has one arm which measures 16" for finding studs, Learn more about the Marshalltown 16330

Machined head has self aligning zinc drawbolt for easy blade installation, Satin finish steel blades are precision stamped in eighths and sixteenths on each side, Level vials are durable acrylic, The SCS16 square also features a hardened scriber with brass… Learn more about the Malco Tools SCS12

Easy one-piece layout for both 1" (25mm) and 1 1/2 (38 mm) ductboard, Adjustable " Finger" Clip allows user to finish cut accurately while arm is fully extended, Five position Angle Arm accommodates user's reach and hold square in alignment,… Learn more about the Malco Tools FGS

Kraft's 7" Rapid Square is great for marking perpendicular lines and angles. The solid aluminum extruded square won't bend, break, rust or corrode, and it also can be used as a safe saw guide.

Learn more about the Kraft SLRS45

The Kraft SLCS1 12" combination square boasts contractor-grade quality. It allows scribing on 8" and 10" stock and features a black metal handle with built-in scriber and level.  It also comes with a solid brass adjusting knob and scriber.

Learn more about the Kraft SLCS1

The Keson KS80RS 7" rafter square is a handy tool to quickly establish parallel lines and layout angles for roofs, stairways, decks and other general construction projects. A speed square is a must have for anyone who builds professionally or as a hobby.

Learn more about the Keson KS80RS

Easy to read, Inch dimensions, hip-val top cuts and common cuts, and degree scale, Both sides maked exactly the same, Handles all your framing needs, Fits in your toolbox, Heavy-duty Aluminum Alloy, stronger than standard aluminum squares, Learn more about the Keson KS120

Learn more about the Empire Levels E280

With the 12" True Blue® Heavy-Duty Professional Combination Square (e250) from Empire® you will have the precision and accuracy needed for any project. The heavy-duty machine head combined with True Blue® vials ensure accuracy up to 0.001". The inch graduations are etched into the stainless steel blade that will not suffer from rust or corrosion.

Learn more about the Empire Levels E250

Learn more about the Empire Levels 3990

Empire's 7" Heavy-Duty Magnum Rafter Square is great for marking perpendicular lines and angles. The solid aluminum extruded square won't bend, break, rust or corrode, and it also can be used as a safe saw guide.

Learn more about the Empire Levels 2990

Features a durable Polycast® handle to withstand the toughest applications, The recessed hand grip gives you the ability to hang on to the level easier, The low profile locking nut allows you to switch between left or right hand use,… Learn more about the Empire Levels 130