ToolBarn.com

The AmPro 4 Piece Pry Bar Set (T70702) contains four pry bars with high impact handles designed to meet all your prying needs. The set comes in four sizes: 8" (200mm), 12" (300mm), 18" (450mm) and 24" (600mm).

Learn more about the AmPro T70702

Bostitch gives you the right tool for the demolition job with this 24" Spring Steel Wrecking Bar (55-501). It's conveniently lightweight so it's easy to handle, but that doesn't mean it skimps on durability.  Made of heat-treated 3/4" diameter spring steel, it has a wider priming edge to give you superior leverage while you work. 

Learn more about the Bostitch 55-501

Bostitch gives you the right tool for the demolition job with this 36" Spring Steel Wrecking Bar (55-502). It's conveniently lightweight so it's easy to handle, but that doesn't mean it skimps on durability.  Made of heat-treated 3/4" diameter spring steel, it has a wider priming edge to give you superior leverage while you work. 

Learn more about the Bostitch 55-502

Nail pulling and prying are a cinch when you've got the Bostitch 10" Double-End Claw Bar (55-505). Heat-treated for maximum durability, its double-end puller features 90º and 30º offset claws, plus it has fully sharpened claw tips for ultimate performance.

Learn more about the Bostitch 55-505

Prying molding and trim is easier than ever with the Bostitch 10" Moulding Bar (55-506). Made from forged, high-carbon spring steel, it reduces material damage while you pry.  The polished flat surface and beveled claws give you the precise penetration you need, plus its ergonomic grip makes it more comfortable to hold. 

Learn more about the Bostitch 55-506

Precision nail pulling and prying is easier than ever with this 10" Claw Bar (55-507) by Bostitch. Made from forged, high-carbon spring steel, the he polished flat surface and beveled claws give you the precise penetration you need. Plus, its ergonomic grip makes it more comfortable to hold. 

Learn more about the Bostitch 55-507

Precision nail pulling and prying is easier than ever with this 12" Claw Bar (55-508) by Bostitch. Made from forged, high-carbon spring steel, the he polished flat surface and beveled claws give you the precise penetration you need. Plus, its ergonomic grip makes it more comfortable to hold. 

Learn more about the Bostitch 55-508

This 19" Forged Alloy Nail Puller from Crescent® features a box-joint, hardened and tempered jaw. (Crescent item 56)

Learn more about the Crescent 56

DA Bars® from Dalluge® are perfect for removing molding and trim work. Available as Nail Pullers, Scrapers, and Pry Bars.

Learn more about the Dalluge 04DABAR

The Wrecking Bar features a Tri-Lobe Design, providing comfort and strength while prying and pulling.

Learn more about the DEWALT DWHT55

The Flat Bar features an Extra Wide Prying End, providing leverage and pry surface.

Learn more about the DEWALT DWHT555

The wrecker bar has a push/pull action making even the toughest job simple. Made of heavy duty hex stock, this guaranteed-for-life product is a great all-around household tool. Unique rocker head creates more power without blocking Learn more about the Fulton TW24WB

Learn more about the Fulton TW30WB

Learn more about the Fulton TW36WB

The wrecker bar has a push/pull action making even the toughest job simple. Made of heavy duty hex stock, this guaranteed-for-life product is a great all-around household tool. Unique rocker head creates more power without blocking Learn more about the Fulton TW48WB

The 82212 indexible nail puller from GearWrench™ is designed to allow you to adjust the head to gain the maximum amount of leverage for your job. 

Learn more about the GearWrench 82212

Knurled handle provides a better overall grip, The indexable head turns 180 degrees for greater leverage, Features 14 locking positions, Extendable for added reach into tighter spaces, The grooved foot gives added traction, Extends ANSI requirements for proven strenght,… Learn more about the GearWrench 82220

The 82248 extendable and indexing pry bar from GearWrench™ is designed to withstand more than 400 lbs. of force, making it the tool of choice for big leverage jobs.  

Learn more about the GearWrench 82248

Get full use out of the Jet 15 ton and 20 ton screw jacks with this 3/4"x36" SJTB-3/4 Turning Bar (440303).

Learn more about the Jet 440303

Jorgensen's Style No. 92064 Pony® heavy-duty bars have a forged ends from high quality alloy steel head.

Learn more about the Jorgensen 64-454

Jorgensen's Style No. 92064 Pony® heavy-duty bars have a forged ends from high quality alloy steel head.

Learn more about the Jorgensen 64-460

Jorgensen's Style No. 92064 Pony® pry bars and nail pullers are designed for light-duty prying like nails, loose boards, and cabinets.

Learn more about the Jorgensen 64-494

Jorgensen's Style No. 92064 Pony® pry bars and nail pullers are designed for light-duty prying like nails, loose boards, and cabinets.

Learn more about the Jorgensen 64-495

Jorgensen's Style No. 92064 Pony® heavy-duty bars have a forged ends from high quality alloy steel head.

Learn more about the Jorgensen 64-508