Categories in Sanding & Filing Tools (5)
Sanding & Filing Tools
Items 1 to 25 of 38 total
Page:
- 1
- 2

View as: List Grid
-
Marshalltown 19656
9-3/8" x 3-/14" Pole Sander Head with 48" Aluminum Handle (E549)
$22.99In StockDurable and lightweight cast aluminum head, Rubber pad with wing nut clamps, Universal joint for work at any angle, Ideal for wall, floor and ceiling applications, Made in the U.S.A., Learn More -
Marshalltown 16441
8" x 3-1/2" 20-Grit Rub Brick (841)
$14.99Made from fluted silicon carbide stone, Comfortable handle, makes longer jobs easier, Ideal for dressing down and removing form marks from concrete, Made in the U.S.A., Learn More -
Marshalltown 14390
DuraSoft® Rasp without Rails (DR390)
$8.99In StockRemoves 45% more material per stroke than other popular rasps, Will not clog or collect dust, Works in both directions, Long-lasting premium stainless steel blade, Contoured DuraSoft® handle ensures a good grip, Ends of blade get into tight spaces, Sharp… Learn More -
Marshalltown 14589
Panel Lifter, Rasp & Bottle Opener (PL589)
$8.99In StockSimply slide the PL589 under a sheet of drywall and step on the exposed handle to lift all standard sizes of drywall sheets, Bottom of the handle is a non-clogging drywall rasp with guides to keep you on the edges… Learn More -
Nicholson 00912M
4-1/2" Machete Sharpening File
$2.00American pattern machete sharpening file, Used for sharpening machete knife blades, Single cut with no edge teeth, Triangular in shape, Tapers slightly toward point, Learn More -
Nicholson 18846
10" Pattern Maker Cabinet Rasp, Second Cut, No. 49
$34.99In StockAmerican pattern rasp, pattern makers cabinet, Used primarily by cabinetmakers, Half-round shape, Narrow pattern, cut edges, Used when smooth wood finish is required, Learn More -
Nicholson 3665
10" Flat Bastard Cut
$7.00In StockAmerican pattern flat file, bastard cut, Used by machinists, machinery builders, ship and engine builders, Also by repairman and others who require rapid removal of metal, Rectangular in cross section and taper slightly towards point in width, Double cut on… Learn More -
Nicholson 3762
12" Flat Bastard Cut File (Carded)
$12.50In StockAmerican pattern flat file, bastard cut, Used by machinists, machinery builders, ship and engine builders, repairman and others who require rapid removal of metal, Rectangular in cross section and taper slightly towards point in width, Double cut on sides, single… Learn More -
Nicholson 3764
12" Flat Bastard Cut
$9.00In StockAmerican pattern flat file, bastard cut, Used by machinists, machinery builders, ship and engine builders, Also by repairman and others who require rapid removal of metal, Rectangular in cross section and taper slightly towards point in width, Double cut on… Learn More -
Nicholson 3830
12" Flat Smooth Cut File
$14.00In StockAmerican pattern flat file, smooth cut, Rectangular in cross section and taper slightly towards point in width, Double cut on sides, single cut on edges, Used by machinists, machinery builders, ship and engine builders, Also used by repairman and others… Learn More -
Nicholson 04798HN
6" Half Round, Bastard Cut, American Pattern File with Ergonomic Handle
$9.45In StockRounded on one side, flat on the the opposite - use on concave, convex, and flat surfaces, Back of the file is double-cut (sets of diagonal rows of teeth, used with heavier pressure and removes material faster from the workpiece),… Learn More -
Nicholson 5090
12" Half Round Bastard Cut File (Carded)
$14.50American pattern half round file, bastard cut, Used on concave, convex and flat surfaces, Rounded on 1 side, flat on opposite, Backs are double cut, Flat sides of all half-round files are double cut, Carded, Learn More -
Nicholson 5190
14" Half Round Pipeliner File (Boxed)
$13.50In StockAmerican pattern half round pipeliner file, bastard cut, Used on concave, convex and flat surfaces, Rounded on 1 side, flat on opposite, Back is single cut, Flat side is single cut, Boxed, Learn More -
Nicholson 8642
10" Mill Bastard Cut
$5.00In StockAmerican pattern mill file, bastard cut, Used for sharpening mill or circular saws, Also for draw-filing and finishing metals, Rectangular shape, Single cut on sides and edges, 2 square edges, All sizes taper slightly in width, Learn More -
Nicholson 12131
12" Round Bastard Cut File (Carded)
$8.50In StockAmerican pattern round file, bastard cut, Primarily used to file circular openings or concave surfaces, Single cut, Tapered slightly towards point, Carded, Learn More -
Nicholson 12134
12" Round Bastard Cut File
$8.00In StockAmerican pattern round file, bastard cut, Primarily used to file circular openings or concave surfaces, Single cut, Tapered slightly towards point, Learn More -
Nicholson 13114-C
8" Square Second Cut File
$7.99In StockAmerican pattern square file, second cut, Used on slots, keyways and general surface filing, Square shape, Double cut, Tapered slightly towards point, Larger sizes frequently preferred to corresponding flat files, This is due to a heavier section and 4 filing… Learn More -
Nicholson 13814M
6" Blunt Machete File
$2.00In StockAmerican pattern taper file, machete, blunt, Used for sharpening machete knife blades, Single cut with no edge teeth, Triangular in shape, Parallel edges, Learn More -
Nicholson 21745HN
8" Half Round Bastard Cut File with Ergonomic Handle
$11.25Rounded on one side, flat on the the opposite - use on concave, convex, and flat surfaces, Back of the file is double-cut (sets of diagonal rows of teeth, used with heavier pressure and removes material faster from the workpiece),… Learn More -
Nicholson 21746HN
10" Half Round, Bastard Cut, American Pattern File with Ergonomic Handle
$14.45In StockRounded on one side, flat on the the opposite - use on concave, convex, and flat surfaces, Back of the file is double-cut (sets of diagonal rows of teeth, used with heavier pressure and removes material faster from the workpiece),… Learn More -
Nicholson 21825
6" Mill Bastard Cut File without Handle (Carded)
$3.50In StockAmerican pattern mill file, bastard cut, Used for sharpening mill or circular saws, Also for draw-filing and finishing metals, Rectangular shape, Single cut on sides and edges, 2 square edges, All sizes taper slightly in width, Carded, Learn More -
Nicholson 21832
8" Mill Bastard Cut File without Handle (Carded)
$4.25In StockAmerican pattern mill file, bastard cut, Used for sharpening mill or circular saws, Also for draw-filing and finishing metals, Rectangular shape, Single cut on sides and edges, 2 square edges, All sizes taper slightly in width, Carded, Learn More -
Nicholson 21839
10" Mill Bastard Cut File without Handle (Carded)
$5.50In StockAmerican pattern mill file, bastard cut, Used for sharpening mill or circular saws, Also for draw-filing and finishing metals, Rectangular shape, Single cut on sides and edges, 2 square edges, All sizes taper slightly in width, Carded, Learn More -
Nicholson 21842
12" Mill Bastard Cut File without Handle (Carded)
$9.50In StockAmerican pattern mill file, bastard cut, Used for sharpening mill or circular saws, Also for draw-filing and finishing metals, Rectangular shape, Single cut on sides and edges, 2 square edges, All sizes taper slightly in width, Carded, Learn More -
Nicholson 21846
6" Round Bastard Cut File without Handle (Carded)
$4.00In StockAmerican pattern round file, bastard cut, Primarily used to file circular openings or concave surfaces, Single cut, Tapered slightly towards point, Carded, Learn More
Items 1 to 25 of 38 total
Page:
- 1
- 2

View as: List Grid






























