Hitachi 725297 Framing Nailer and 2 HP Compressor Combo Kit

Hitachi 725297

Normally Ships in 2 - 3 business days

$579.99

Add Items to Cart Qty:

Found in the following categories:

Nailer
Equipped with the same output mechanism as the NR83A that well reputed with its rapid driving and quick response, good balance and light weight for easy one-handed operation
Two-piece magagine - the body handle is fixed to the magagine with bolts and is easily detached and repaired
Equipped with SINGLE ACTUATION/CONTACT ACTUATION switching device to meet the requirements of NEW ANSI SNT-101-2002
Rubber grip for comfortable handling
Compressor
Direct drive electric motor
Vertically stacked twin tanks, 4.3 gallon capacity
Line regulator with gauge
Pressure switch has start/stop control at 100/125 PSI with 14 second recovery time
15 AMP motor runs at 3450 RPM providing 8.2 CFM of free air

Manufacturer's SKU	725297
Manufacturer	Hitachi
Shipping Weight	87.0000
Condition	New
Manufacturers Warranty	1 Year
Return Policy	30 Days
Addl Specs	Nailer Actual Weight: 8.6 lbs. Dimentions (L x H x W): 21-3/16" x 13-1/8" x 4-1/4" Operating Pressure: 70 - 120psi Magazine Capacity: 70 nails (2 strips) Applicable Nail: (Round-Head) Angle 21 degrees Collation Plastic-collated strip nails, (Diameter 0.113" - 0.131", Length 2" - 3-1/4" Compressor Air: 4.0 CFM at 90 PSI Weight: 60 lbs. General