Hitachi NV45SHT50DF Roofing Nailer with Free Large Head 20 Gauge x 1/2" Crown Hammer Tacker

Features

NV45AB2S Nailer
5.7 lbs, lightweight and well balanced for easy maneuverability
Tool-less depth of drive adjustment, for precision nailing/flush driving
Bottom loading magazine
Carbide tipped push lever, reduces wear
Rubber pads, help keep nailer from sliding off roof when not in use
Rubber safety valve cover, resists dirt and tar for prolonged life of tool
Quick driving, for maximum efficiency
Pneumatic power feed and return, allows tool to operate in the harshest conditions
Long-lasting rubber grip, for added comfort
HHT50DF Hammer Tacker
Ideal for fastening down tar paper and other roofing materials
Works with DUO-FAST 5000 or SIMILAR TO Duo-Fast
5000 and other DF50 TYPE STAPLES
Works with 1/4" TO 3/8" Long 50 GA x 1/2" CROWN Staples
Has a capacity of 168 staples

Manufacturer's SKU	NV45SHT50DF
Manufacturer	Hitachi
Shipping Weight	13.0000
Condition	New
Manufacturers Warranty	5 Years
Return Policy	30 Days
Addl Specs	NV45AB2S Nailer Fastener Diameter Range: 0.120 Magazine Loading: Bottom Air Inlet: 3/8 Inch Magazine Capacity: 120 Jam Clearing: Tool-Less Depth Setting: Tool-Less Operating Pressure: 70-120 psi Actuation: Contact, Sequential Optional Length: 9-27/32 Inches Width: 4-5/8 Inches Height: 10-3/8 Inches Tool Weight: 5.7 Pounds Fastener Type: Coil, Wire Collation Magazine Angle: 16-Degrees Fastener Length Capacity: 7/8 x 1-3/4 Inches HHT50DF Hammer Tacker Gauge: 20 Crown Used: 1/2 Inch Length Used: 1/4 to 3/8 Inch Capacity: 168 Recomended Staples: Duo-Fast 5000/DF50 Staples

Pneumatic Accessories: air-hose-fittings, air-hoses, lubricants, safetyglasses
Spotnails Nails: CRN08G, CRN10G, CRN12G, CRN14G
Hitachi Nails: 12100, 12101, 12102, 12103, 12121
Unicatch Nails: RN19, RN25, RN32-S, RN38-S, RN45-S
Duo-Fast Staples: 5016D, 5016C, 5012C, 5008C