Milwaukee 1/2 in. Motor for Electromagnetic Drill Press, 600 RPM
The 4253-1 electromagnetic drill motor features 6.2 amps and a 1/2 in. chuck turning at 600 rpm. This motor is best used on the 4202 fixed position base. Light weight and ample power make this a good choice for smaller holes into steel.
- 1/2 inch capacity, 6.2 amp motor, 600 RPM
- Taps up to 5/8 inch -18 threaded hole. 5/8-11 and 1/2-13 taps not recommended
- 1/2 inch keyed chuck
- Develops up to 1650 pounds of drill point pressure with a 1 inch steel plate
- NOTE: This product is excluded from Milwaukee's 30 day satisfaction policy.