1/2" x 1" HSS Annular Cutter
|
Sale Price: $22.99
|
|
5 in stock
- 3/4" diameter shank-industry standard
- Unique tooth geometry, allows for better centering and faster cutting
- Thin wall design, enables cutters to cut faster and more efficiently by removing less material during drilling
|
9/16" x 1" HSS Annular Cutter
|
Sale Price: $23.99
|
|
2 in stock
- 3/4" diameter shank-industry standard
- Unique tooth geometry, allows for better centering and faster cutting
- Thin wall design, enables cutters to cut faster and more efficiently by removing less material during drilling
|
5/8" X 1" HSS Annular Cutter
|
Sale Price: $24.99
|
|
2 in stock
- Milwaukee 49-59-0625 is a 5/8" X 1" HSS Annular Cutter
- The high speed steel cutter has shorter flute design which allows for chips to fall freely from cutter
- An unique tooth geometry allows for better centering and faster cutting
- Thin wall design enables cutters to cut faster and more efficiently by removing less material during drilling
|
11/16" x 1" HSS Annular Cutter
|
Sale Price: $25.99
|
|
Normally Ships in 7 - 10 business days
- Unique Tooth Geometry allows for better centering and faster cutting.
- Thin Wall Design enables cutters to cut faster and more efficiently by removing less material during drilling
- Flute design
|
3/4" X 1" HSS Annular Cutter
|
Sale Price: $26.99
|
|
2 in stock
- 3/4" diameter shank-industry standard
- Unique tooth geometry, allows for better centering and faster cutting
- Thin wall design, enables cutters to cut faster and more efficiently by removing less material during drilling
|
13/16" x 1" HSS Annular Cutter
|
Sale Price: $29.99
|
|
1 in stock
- 3/4" diameter shank-industry standard
- Unique tooth geometry, allows for better centering and faster cutting
- Thin wall design, enables cutters to cut faster and more efficiently by removing less material during drilling
|
7/8" X 1" HSS Annular Cutter
|
Sale Price: $32.99
|
|
3 in stock
- 3/4" diameter shank-industry standard
- Unique tooth geometry, allows for better centering and faster cutting
- Thin wall design, enables cutters to cut faster and more efficiently by removing less material during drilling
|
15/16" X 1" HSS Annular Cutter
|
Sale Price: $34.99
|
|
2 in stock
- 3/4" diameter shank-industry standard
- Unique tooth geometry, allows for better centering and faster cutting
- Thin wall design, enables cutters to cut faster and more efficiently by removing less material during drilling
|
1/2 x 2 in. HSS Annular Cutters
|
Sale Price: $26.99
|
|
2 in stock
- 3/4 in. Diameter Shank - Industry Standard
- Unique Tooth Geometry - Allows for beter centering and faster cutting.
- Thin Wall Design - Enables cutters to cut faster and more efficiently by removing less material during drilling
|
9/16" x 2" HSS Annular Cutters
|
Sale Price: $29.99
|
|
1 in stock
- 3/4" diameter shank-industry standard
- Unique tooth geometry, allows for better centering and faster cutting
- Thin wall design, enables cutters to cut faster and more efficiently by removing less material during drilling
|
5/8" X 2" HSS Annular Cutter
|
Sale Price: $32.99
|
|
Normally Ships in 7 - 10 business days
- 3/4" diameter shank-industry standard
- Unique tooth geometry, allows for better centering and faster cutting
- Thin wall design, enables cutters to cut faster and more efficiently by removing less material during drilling
|
11/16" x 2" HSS Annular Cutter
|
Sale Price: $36.99
|
|
3 in stock
- 3/4 in. diameter shank - industry standard
- Unique tooth geometry - allows for better centering and faster cutting
- Thin wall design - enables cutters to cut faster and more efficiently by removing less material during drilling
|
1" X 1" HSS Annular Cutter
|
Sale Price: $36.99
|
|
2 in stock
- The high speed steel cutter
- Shorter flute design allows chips to fall freely from cutter
- An unique tooth geometry allows for better centering and faster cutting
- Thin wall design enables cutters to cut faster and more efficiently by removing less material during drilling
|
3/4 " x 2" HSS Annular Cutters
|
Sale Price: $38.99
|
|
1 in stock
- 3/4 in. diameter shank - industry standard
- Unique tooth geometry - allows for better centering and faster cutting
- Thin wall design - enables cutters to cut faster and more efficiently by removing less material during drilling
|
13/16" x 2" HSS Annular Cutters
|
Sale Price: $40.99
|
|
Normally Ships in 7 - 10 business days
- 3/4 in. diameter shank - industry standard
- Unique tooth geometry - allows for better centering and faster cutting.
- Thin wall design - enables cutters to cut faster and more efficiently by removing less material during drilling
|
1-3/16" x 1" HSS Annular Cutter
|
Sale Price: $52.00
|
|
Normally Ships in 7 - 10 business days
- Incorporates the industry standard shank diameter of 3/4"
- The original tooth geometry is designed to perform cuts faster while also allowing for better centering
- The thin wall design aids in the cutters speed and efficiency by removing less material during the drilling process
- The shorter flute design allows for removed debris to fall freely away from the cutter
- This Annular cutter is designed to cut a 1 inch deep hole that is 1-3/16 inches in diameter
- The ejector pins can be used on all diameters Use 44-60-1720 for 1 in. depths and 44-60-1721 for 2 in. depths
- The ejector pin extends a 1/2 inch beyond the tooth tip and allows for an easier and faster aligning on the hole
- The ejector pins are sold separately
|
7/8" x 2 " HSS Annular Cutter
|
Sale Price: $42.99
|
|
2 in stock
- 3/4 in. diameter shank - industry standard
- Unique tooth geometry - allows for better centering and faster cutting
- Thin wall design - enables cutters to cut faster and more efficiently by removing less material during drilling
|
15/16" x 2" HSS Annular Cutters
|
Sale Price: $46.99
|
|
Normally Ships in 7 - 10 business days
- 3/4 in. diameter shank - industry standard
- Unique tooth geometry - allows for better centering and faster cutting
- Thin wall design - enables cutters to cut faster and more efficiently by removing less material during drilling
|
1" x 2" HSS Annular Cutters
|
Sale Price: $61.99
|
|
2 in stock
- 3/4 in. diameter shank - industry standard
- Unique tooth geometry - allows for better centering and faster cutting
- Thin wall design - enables cutters to cut faster and more efficiently by removing less material during drilling
|
1-1/8" X 2" HSS Annular Cutter
|
Sale Price: $59.99
|
|
1 in stock
- 3/4" Diameter Shank - Industry standard
- Unique Tooth Geometry - Allows for better centering and faster cutting
- Flute Design - Shorter flute design allows chips to fall freely from cutter
- Thin Wall Design - Enables cutters to cut faster and more efficiently by removing less material during drilling
- Ejector Pins Can Be Used on All Diameters - Ejector pin sold separately
|
1-1/4" X 2" HSS Annular Cutter
|
Sale Price: $66.99
|
|
Normally Ships in 7 - 10 business days
- Has a full 2 inch cutting depth
- Incorporates an industry standard 3/4" diameter shank
- A unique tooth geometry allows for better centering as well as faster cutting
- A thin wall design enables cutters to cut faster and more efficiently by removing less material during drilling
- The flute design is shorter and allows chips to fall freely away from cutter
- The ejector pins can be used on all diameters (44-60-1720 for 1" depth and 44-60-1721 for 2" depth.)
- Ejector pin extends 1/2" beyond tooth tip which allows for easier and faster location of pin on hole
- Ejector pin sold separately
|
1-1/2" x 1" HSS Annular Cutter
|
Sale Price: $79.00
|
|
1 in stock
- 3/4" Diameter Shank - Industry standard
- Unique Tooth Geometry - Allows for better centering and faster cutting
- Flute Design - Shorter flute design allows chips to fall freely from cutter
- Thin Wall Design - Enables cutters to cut faster and more efficiently by removing less material during drilling
- Ejector Pins Can Be Used on All Diameters - Ejector pin sold separately
|
1-1/2" X 2" HSS Annular Cutter
|
Sale Price: $86.99
|
|
Normally Ships in 7 - 10 business days
- 3/4" Diameter Shank - Industry standard
- Unique Tooth Geometry - Allows for better centering and faster cutting
- Flute Design - Shorter flute design allows chips to fall freely from cutter
- Thin Wall Design - Enables cutters to cut faster and more efficiently by removing less material during drilling
- Ejector Pins Can Be Used on All Diameters - Ejector pin sold separately
|
1-5/8" x 2" HSS Annular Cutter
|
Sale Price: $109.99
|
|
Normally Ships in 7 - 10 business days
- 20% thinner wall construction leads to faster cutting (up to 15% faster)
- Duel alternating tooth geometry creates more aggressive cutting as well as increased chip ejection
- Proprietary steel and 3 hardness zones makes the bit less susceptible to breakage
- One centering pin size for all 2" depth cutters
- 3/4" weldon shank fits most small magnetic drill presses
- Ejector pin sold separately
|
1-3/4" x 2" HSS Annular Cutter
|
Sale Price: $129.99
|
|
Normally Ships in 7 - 10 business days
- 20% thinner wall construction leads to faster cutting (up to 15% faster)
- Duel alternating tooth geometry creates more aggressive cutting as well as increased chip ejection
- Proprietary steel and 3 hardness zones makes the bit less susceptible to breakage
- One centering pin size for all 2" depth cutters
- 3/4" weldon shank fits most small magnetic drill presses
- Ejector pin sold separately
|
