ToolBarn.com

Manufacture's Instructions / Notes for use:

• Position the ear muff cups at the bottom of the slots in the headband. Fit the cups over the ears. Slide the headband down until it touches the head.
• Limitations of Use: Protection will only be offered if the ear muff is fitted correctly. Ear pads may deteriorate with use and should be examined at frequent intervals. Do not apply paint, solvents, adhesives or self-adhesive labels, except in accordance with instructions from the manufacturer. The ear pads, when in contact with the skin may cause allergic reactions to susceptible individuals. If this occurs leave the hazard area, remove the ear defender and seek medical advice.
•  If the ear muff is to be worn for long periods the noise level must be reduced to 80 dB. Before selection of a suitable ear muff a noise survey should be carried out.
•  Eyewear frames and hair between the ear pads and the head may affect the performance of the ear muff.

• Eye Muff Material: Acylonitrile Butadiene Styrene (ABS) cups
• Head Band: Polypropylene
• Open Cell Foam Inserts Material: PVC covered open cell foam pads
• Colors: Blue and Black 
• Ear Muff Cup Open Area: 1.57 Inches x 2.76 Inches
• One size available
• Conformity: EN 24869 and ANSI S3.19-1974
• SNR = 26 dB
• NRR = 19 dB
• Cleaning and Maintenance: Ear muffs may be cleaned with soap and warm water. Dry with a soft cloth. DO not clean with chemical or abrasive cleaners. Store out of direct sunlight, away from chemicals and not exposed to extremes of temperature