ToolBarn.com

Compact Drill Driver, Compact Tough™ design for increased maneuverability in tight spaces and less user fatigue, Durashield™ housing is constructed to withstand real world conditions, Two-speed gearbox optimized for two modes of operation: High torque mode produces over 310… Learn More

18V Brute Tough Drill/Driver, Newly designed motor gives you 50 in.-lbs more torque, is 500 RPM faster, and will last over three times longer than the previous generation, New 1/2" Metal Chuck has an increased durability and 25 percent… Learn More

18V Compact Tough™ Drill/Driver, Newly designed motor gives you 50 in.-lbs more torque, is 500 RPM faster, and will last over three times longer than the previous generation, New 1/2" Metal Chuck has an increased durability and 25 percent… Learn More

PS10 I-Driver™ , The ultra-compact head is just 3.5" total head length allowing the I-Driver to fit where traditional drills, even right angle drills, can't go, 90-Degree articulating head with five position locks helps the user get to hard… Learn More

PS10 I-Driver™ , The ultra-compact head is just 3.5" total head length allowing the I-Driver to fit where traditional drills, even right angle drills, can't go, 90-Degree articulating head with five position locks helps the user get to hard… Learn More

PS50 Multi-X Oscillating Tool, The Multi-X performs like a corded oscillating tool with the functionality of a cordless tool , Designed to work with a variety of materials including soft woods, hard woods, drywall, plastic, metals and grouting, The… Learn More

PS30 Compact Drill/Driver, The newly developed compact duty tool that can accommodate 90% of common applications comes with a 3/8" Single Sleeve tool less Chuck, Capable of producing 220 in-lbs of Max Torque, Has 2 Speeds, low which runs… Learn More

The Bosch™ CLPK23180 Slim Pack Litheon™ 2 tool combo kit is designed to be compact, lightweight and easy to maneuver making it ideal for working in cramped hard to reach areas.  The kit comes with a Drill-Driver, an Impactor™, two slim pack Litheon™ batteries, a charger and carrying case.  

Learn More

Reciprocating Saw, Soft Grip Rubber Boot for sure under-hand or over-hand cutting, Blade holder allows up or down cutting, 0 - 2300 SPM for faster cuts, Push-Button Foot Adjustment for depth-of-cut control and extended blade life, 2 Cutting lengths :… Learn More

17618 Hammer Drill/Driver, The high torque mode can produce over 650 inch-pounds of driving force, The high speed mode can produce 2,050 RPM, up to 30,750 BPM, The Durashield� housing & uni-body power train provide optimum reinforcement which allows the… Learn More

Impact Driver PS40-2, Up to 800 inch pounds of torque, Drives 100 3-inch screws per battery charge, Ultra-Compact design, that is almost half the size of a 12V compact driver, LED light for tight spaces and applications, Forward/Reverse button is… Learn More

17618 Hammer Drill/Driver, The high torque mode can produce over 650 inch-pounds of driving force, The high speed mode can produce 2,050 RPM, up to 30,750 BPM, The Durashield® housing & uni-body power train provide optimum reinforcement which allows… Learn More

Brute Tough&trade 1/2" Hammer Drill/Driver, Steel-reinforced collar - Enhances durability and protects tool when dropped on the chuck, DuraShield&trade housing - Constructed to withstand real world conditions, Unibody power train - Maintains alignment between clutch, gearbox and motor for the… Learn More

36 Volt Hammer Drill, Constructed to withstand real world conditions the Brute Tough&trade Construction with Una body Power train, Metal-Reinforced Collar and Durasheild&trade housing can with stand repeated 1-story drops, Easily engage and disengage the Hammer mode with the Hammer… Learn More

This Bosch three tool cordless combo kit includes a hammer drill/driver a 6-1/2" circular saw, a flashlight and two Litheon™ system 36 volt batteries.

Learn More

36 Volt Hammer Drill, Constructed to withstand real world conditions the Brute Tough&trade Construction with Una body Power train, Metal-Reinforced Collar and Durasheild&trade housing can with stand repeated 1-story drops, Easily engage and disengage the Hammer mode with the Hammer… Learn More

36 Volt Hammer Drill, Constructed to withstand real world conditions the Brute Tough&trade Construction with Una body Power train, Metal-Reinforced Collar and Durasheild&trade housing can with stand repeated 1-story drops, Easily engage and disengage the Hammer mode with the Hammer… Learn More

36 Volt Hammer Drill, Constructed to withstand real world conditions the Brute Tough&trade Construction with Una body Power train, Metal-Reinforced Collar and Durasheild&trade housing can with stand repeated 1-story drops, Easily engage and disengage the Hammer mode with the Hammer… Learn More

18 Volt Jig Saw, Patented Bosch Blade Retention, One-TouchTM Blade Change System for Quick Blade changes - Ejects Hot or Broken Blades With the Pull of a Lever, Large, Die-Cast Aluminum Foot - Provides Stable Guidance and Control, Exclusive 3-way… Learn More

This two tool Dwalt 18 volt cordless combo kit includes a 1/2" hammerdrill, a 6-1/2" circular saw, two XRP™ system batteries, a 1 hour charger and a nylon contractor bag.

Learn More

DCD950 XRP� 18V cordless hammerdrill, High power, high efficiency motor delivers 510 unit watts out of max power for superior performance, XRP� extended run-time batteries provide long run-time & battery life, Patented 3-speed all-metal transmission matches the speed to… Learn More

DCD950 XRP� 18V cordless hammerdrill, With patented 3-speed all-metal transmission and �� self-tightening chuck, Delivers 450 units watts out of maximum performance, faster application speed, and superior bit retention, DC827 18V Impact Driver, Delivers 1,330 in-lbs of torque and… Learn More

DCD970 XRP™ 18V cordless hammer-drill, With patented 3-speed all-metal transmission and 1/2" self-tightening chuck delivers 450 units watts out of maximum performance, Faster application speed, and superior bit retention, DC827 18V Impact Driver, Delivers 1,330 in-lbs of torque and… Learn More

DCD950 XRP� 18V Cordless hammerdrill, With patented 3-speed all-metal transmission and �� self-tightening chuck delivers 450 units watts out of maximum performance, Faster application speed, and superior bit retention, DC390 XRP� 18V Circular saw, With 6-1/2" carbide blade and… Learn More

DCD950 XRP� 1/2" Hammerdrill/Drill/Driver, DEWALT built high torque motor delivers 500 in-lbs of maximum torque, Patented 3-speed transmission features a max 3rd speed at 2,000 rpm, Hammer drill mode: 34,000 bpm drills faster holes in masonry applications, 1/2" metal… Learn More

DCD950 XRP� 18V cordless hammerdrill, With patented 3-speed all-metal transmission and �� self-tightening chuck, Delivers 450 units watts out of maximum performance, faster application speed, and superior bit retention, DC825 18V Impact Driver, Delivers 1,330 in-lbs of torque and… Learn More

This Dewalt 18 volt cordless five tool combo kits includes a 1/2" hammerdrill, a 6-1/2" circular saw, a reciprocating saw, a jig saw, a flexible floodlight, a vehicle charger and three XRP™ system batteries.

Learn More

This Dewalt 5 tool combo kit includes a 1/2" hammerdrill, a circular saw, a reciprocating saw, a jig saw, a flexible floodlight and two 18 volt XRP™ system batteries.

Learn More

This Dewalt 6 tool combo kit includes a 1/2" hammerdrill, a circular saw, a reciprocating saw, a right angle drill, a cut-off tool and a flexible floodlight which all run off of two of the included XRP™ system batteries.

Learn More

DC950 XRP™ 18V 1/2" hammerdrill/drill/driver, DEWALT built high power, high efficiency motor delivers 510 unit watts out of power for maximum performance in all drilling and fastening applications, Heavy-Duty 1/2" self-tightening chuck tightens throughout operation providing superior bit gripping… Learn More

DCD950 XRP™ 18V Cordless hammerdrill , With patented 3-speed all-metal transmission and 1/2" self-tightening chuck delivers 450 units watts out of maximum performance, Faster application speed, and superior bit retention, DC825 1/4" Impact Driver, The compact size & lighter… Learn More

Now you can get two of the DC925 1/2" hammerdrill & drivers in one kits, with two Nicad batteries, charger and contractors bag. 

Learn More

The DeWALT™ DC720CA is a combo kit that consists of the DC720 1/2" Compact Drill/Driver and the DW938 reciprocating saw in one combo kit.  This kit comes with two 18 Volt Ni-cad batteries, one charger and contractrors bag.  

Learn More

DC759 18V 1/2" Compact Drill/Driver, Compact Size: Fits into the Tightest Conditions, High Performance Motor Delivers 450 in.-lbs. of Maximum Torque, Lightweight Design (5.2 lbs.) Minimizes User Fatigue, 1/2" Single Sleeve Keyless Ratcheting Chuck for Tighter Bit Grip, Dual Speed… Learn More

DC925 XRP™ 18V 1/2" hammerdrill/drill/driver DEWALT built high power, high efficiency motor delivers 510 unit watts out of power for maximum performance in all drilling and fastening applications, XRP™ extended run-time batteries provide long run-time & battery life, Patented 3-speed… Learn More

DC925 XRP&trade 1/2" 18V Hammer drill/Drill/Driver, DEWALT built high power, high efficiency motor delivers 510 unit watts out of power for maximum performance in all drilling and fastening applications, Preferred ergonomics provides optimal balance, size, and weight, XRP&trade extended run-time… Learn More

Heavy-Duty 1/2" 18V Cordless Hammer Drill with NANO&trade Technology (DC927), This DeWalt® built motor features high power and high efficiency that will deliver 425 unit watts out of max power for a superior performance, The exclusive NANO&trade technology is a… Learn More

Heavy-Duty 1/2" 18V Cordless Hammer Drill with NANO&trade Technology (DC927), This DeWalt® built motor features high power and high efficiency that will deliver 425 unit watts out of max power for a superior performance, The exclusive NANO&trade technology is a… Learn More

DC910 28V Hammer Drill , DEWALT� built high power, high efficiency motor delivers 650 unit watts of out put at max power for superior performance in all drilling and fastening applications, 28V high performance battery pack uses Nano&trade Technology… Learn More

DC910 28V Hammer Drill , DEWALT� built high power, high efficiency motor delivers 650 unit watts of out put at max power for superior performance in all drilling and fastening applications, 28V high performance battery pack uses Nano™ Technology… Learn More

DC910 28V Hammer Drill , DEWALT� built high power, high efficiency motor delivers 650 unit watts of out put at max power for superior performance in all drilling and fastening applications, 28V high performance battery pack uses Nano™ Technology… Learn More

DW988 18V XRP™ 1/2" hammer drill/drill/driver with 450 in.-lbs. of maximum torque and exclusive 3-speed all metal transmission, DW919 18V flexible floodlight provides hands-free use, DW939 18V circular saw with 6-1/2" 16 tooth carbide blade and rip fence can… Learn More

DC925 XRP™ 18V cordless hammer drill, High power, high efficiency motor delivers 510 unit watts out of max power for superior performance, XRP™ extended run-time batteries provide long run-time and battery life, Patented 3-speed all-metal transmission matches the speed… Learn More

Dremel Driver&trade, Powerful 7.2V motor offers a wider range of screw driving applications, even driving up to 3" screws, Compact, lightweight enables you to get in tight spaces others can't, Ergonomically-optimized grip with T-handle design offers you balanced comfort and… Learn More

The Flex™ ALI108SX2 Kit comes with a drill-driver, impact driver,  a LED flashlight, four lithium-ion batteries, two battery chargers, two bit sets, and two carrying cases all for one great price.  

Learn More

Get durability and comfort with the 12 Volt Ni-Cad 3/8" Cordless Drill Kit (DS12DVF3) from Hitachi. 

Learn More

Kit includes the DS10DFL 12V Peak Lithium Ion Micro Driver Drill with a 3/8" keyless chuck and a best-in-class 21+1 clutch with 21 torque settings and a drill mode for ultimate precision and control in both forward and reverse,… Learn More

The Hitachi™ KC18DHL 3 tool combo kit comes with the WH18DSAL 1/4" impact driver, the DS18DSAL 1/2" pro drill-driver, the UB18DAL 18V Flashlight, two compact 1.5Ah lithium-ion batteries, a 40 minute charger and carrying case. 

Learn More

3.0Ah Li-Ion batteries offer three times the life at half the weight, Universal charger that charges 7.2 - 18V Li-Ion, NiMH, and NiCd batteries, Powerful 18V hammer drill with 570 in/lbs of torque, Heavy-duty 18V reciprocating saw features a… Learn More

DV18DL Hammer Drill, Class leading 570 in/lbs of Torque to power through the toughest jobs, 2 step speed switch provides 4 speed settings for ultimate control, Externally accessible carbon brush for quick and easy brush changes, Convenient 5-position belt hook… Learn More

DV18DL Hammer Drill, Class leading 570 in/lbs of Torque to power through the toughest jobs, 2 step speed switch provides 4 speed settings for ultimate control, Externally accessible carbon brush for quick and easy brush changes, Convenient 5-position belt hook… Learn More

HXP Li-Ion batter features fade free power with extended run time, Batter has three times the power capacity of standard Ni-Cd/Ni-Mh batteries with 40% less weight, 18Volt HXP Li-Ion Hammer drill is powerful with 570 in/lbs of torque, Impact… Learn More

HPX Li-Ion batter features fade free power with extended run time, Battery has three times the power capacity of standard Ni-Cd/Ni-Mh batteries with 40% less weight, New DS18DL Driver Drill has 570 in/lb to drive through the toughest materials… Learn More

DV18DL 1/2" Hammer Drill, 3.0Ah Li-Ion batteries for three times the life at half the weight of NiCd and NiMH batteries, Li-ion batteries are backward compatible with all Hitachi 18V DMR and DVF3 tools, Class leading 570 in/lbs of… Learn More

C18DMR Circular Saw, Its blade is mounted on the left side and comes with a built-in spotlight that helps to illuminate the cut line even while working in dimly lit areas, The tool housing is made of lightweight magnesium,… Learn More

Kit includes the DS18DVF3 18-Volt Driver Drill, that produces 400 in/lbs of torque, C18DMR circular saw has its blade mounted on the left side, Kit includes the C18DMR 18-Volt, 6-1/2 inch circular saw, featuring a new aggressive design from… Learn More

DV18DL 1/2" Hammer Drill, 3.0Ah Li-Ion batteries for three times the life at half the weight of NiCd and NiMH batteries, Li-ion batteries are backward compatible with all Hitachi 18V DMR and DVF3 tools, Class leading 570 in/lbs of… Learn More

DV18DL 1/2" Hammer Drill, 3.0Ah Li-Ion batteries for three times the life at half the weight of NiCd and NiMH batteries, Li-ion batteries are backward compatible with all Hitachi 18V DMR and DVF3 tools, Class leading 570 in/lbs of… Learn More

18 Volt 1.5Ah Lithium Ion Batteries, Offer three times the life at half the weight of NiCd and NiMH batteries, Maintain steady power for the duration of the charge, Equipped with current interrupt detection system and a thermal protector for… Learn More

Kit includes (2) 1.5Ah 10.8V Lithium Ion batteries that deliver steady power for the duration of every charge, Kit includes the DB10DL 10.8V Lithium Ion Micro Driver Drill with a 1/4" Hex chuck and a best-in-class 21+1 clutch with 21… Learn More

Kit includes (2) 1.5Ah 10.8V Lithium Ion batteries that deliver steady power for the duration of the every charge, Kit includes the DB10DL 10.8V Lithium Ion Micro Driver Drill with a 1/4" Hex chuck and a best-in-class 21+1 clutch with… Learn More

W150 3/8" Impact Wrench, The most powerful and durable cordless impact in its class Patent-pending IQv technology provides maximum performance, durability, and battery life, Compatible with both the 14.4V lithium-ion (BL144) and 14.4v nickel cadmium (N144) batteries, Ideal for general… Learn More

1/2" Hammer Driver-Drill, 4-pole maximum torque motor delivers 450 in.lbs. of torque, 2-Speed design (0-400 / 0-1,500) covers a wide range of drilling and driving applications, Shift-Lock™ drive system quickly shifts between modes, Compact design at only 8-3/4" length… Learn More

Cordless Driver Dril, Variable speed, reversible 10.8 V Cordless Driver, Feature new 10.8V Lithium-Ion Battery, 18 torque setting delivers up to 195 in./lbs of torque., Two speed gearing for more efficiency, Lightweight and compact design., Built in L.E.D light… Learn More

1/2-Inch Hammer Driver-Drill, 2.5x more cycles and 430 percent total lifetime work are produced with the LXT Lithium-Ion battery and Optimum Charging System, Makita built, 4 pole maximum torque motor delivers 450 in/lbs of torque, A wide range of… Learn More

2-speed gear selection for matching RPM to the application, Conveniently located forward/reverse switch for one-hand operation, 16 torque settings plus drill mode for optimum torque control, Keyless chuck for fast and easy bit changes, Compact tool body and lightweight design… Learn More

Includes two (2) powerful 18V (2.6Ah) Nickel-Metal Hydride batteries, 1/2" Cordless MXT Hammer Driver-Drill (8444), Two-piece ND-31 motor with dual ball bearing for longer motor life, Delivers up to 560 in.lbs. of maximum torque, 16 torque settings, Ergonomic rubberized grip… Learn More

Ultra compact driver-drill and impact driver offer best power-to-weight ratio, 10.8V Lithium-Ion batteries provides longer run time and lower self-discharge, 50-Minute battery charger decreases down-time, 3-year warranty on tools and 1-year warranty on batteries & charger, 10.8V Compact Li-Ion… Learn More

1/2" Hammer Driver-Drill, Makita built, 4-pole maximum torque motor delivers 450 in.lbs. of torque, 2-Speed design (0-400 / 0-1,500) covers a wide range of drilling and driving applications, Shift-Lock™ drive system quickly shifts between modes, Compact design at only 8-3/4"… Learn More

1/2" Hammer Driver-Drill, 4-pole maximum torque motor delivers 450 in.lbs. of torque, 2-Speed design (0-400 / 0-1,500) covers a wide range of drilling and driving applications, Shift-Lock™ drive system quickly shifts between modes, Compact design at only 8-3/4" length and… Learn More

BHP451 Hammer Drill-Driver, LXT Lithium-Ion battery and optimum charging system produces 280% more lifetime work with 2x more cycles, Compact design at only 9-7/8" length and weighs only 4.9 lbs. for less operator fatigue, Makita built, 4-pole maximum torque motor… Learn More

BTD140 Impact Driver, LXT Lithium-Ion battery and optimum charging system produces 280% more lifetime work with 2x more cycles, 50% more compact design at only 5-3/4" long and weighs only 3.3 lbs. for less operator fatigue, Makita built, 4-pole maximum… Learn More

3 Piece Combo Kit includes 18 V Impact Wrench, 18 V Driver Drill, 18 V Rechargeable Flashlight, Great for professional auto repairmen, LXT Lithium-Ion battery and optimum charging system produces a greater total lifetime work with 2.5x more cycles, Lithium-Ion… Learn More

BTW251 1/2" Impact Wrench, Makita built, 4-pole maximum torque motor delivers 170 ft. lbs. of efficient torque in a compact size, More compact design at only 6.5" long and weighs only 3.7 lbs. for less operator fatigue, Batteries charge 2X… Learn More

BHP452 1/2" Hammer-Drill, Makita built, 4-pole maximum torque motor delivers 450 in. lbs. of efficient torque in a compact size, Shift-Lock™ drive system sleeve quickly shifts from "hammer drill" to "driver" mode, 2-Speed design (0-400/ 0-1,500) covers a wide range… Learn More

BHP452 1/2" Hammer-Drill, Makita built, 4-pole maximum torque motor delivers 450 in. lbs. of efficient torque in a compact size, Shift-Lock™ drive system sleeve quickly shifts from "hammer drill" to "driver" mode, 2-Speed design (0-400/ 0-1,500) covers a wide range… Learn More

BHP452 1/2" Hammer Driver-Drill, Makita built, 4-pole maximum torque motor delivers 450 in. lbs. of efficient torque in a compact size, Shift-Lock™ drive system sleeve quickly shifts from "hammer drill" to "driver" mode, 2-Speed design (0-400/ 0-1,500) covers a wide… Learn More

BTD140 Impact Driver, LXT Lithium-Ion battery and optimum charging system produces 280% more lifetime work with 2x more cycles, 50% more compact design at only 5-3/4" long and weighs only 3.3 lbs. for less operator fatigue, Makita built, 4-pole maximum… Learn More

BTP140 Hybrid™ 4-Function Impact-Hammer-Driver-Drill, Hybrid™ 4-Function Tool with impact, hammer, driver and drill all in one tool for all trades, Hybrid™ 4-Function Tool drives lag bolts, drills into concrete, drives screws with clutch settings and drills into wood, metal and… Learn More

BHP452 1/2" Hammer Driver-Drill, Makita built, 4-pole maximum torque motor delivers 450 in. lbs. of efficient torque in a compact size, Shift-Lock™ drive system sleeve quickly shifts from " hammer drill" to " driver" mode, 2-Speed design (0-400/ 0-1,500) covers… Learn More

BHP452 1/2" Hammer Driver-Drill, Makita built, 4-pole maximum torque motor delivers 450 in. lbs. of efficient torque in a compact size, Shift-Lock™ drive system sleeve quickly shifts from " hammer drill" to " driver" mode, 2-Speed design (0-400/ 0-1,500)… Learn More

18 Volt Drill-Driver, Compact design at only 9-3/8" length and weighs only 4.6 lbs. for less operator fatigue, Makita built, 4-pole maximum torque motor delivers 560 in. lbs. of efficient torque in a compact size, Ergonomic shape fits like a… Learn More

Makita BDF452HW, More compact design at only 8” long and weighs only 3.5 lbs. for less operator fatigue, All metal 2-speed transmission, Powerful 4-pole motor design with dual steel ball bearings, Batteries charge 4X faster in only 15 minutes, Ergonomic… Learn More

1/2" Cordless Hammer Driver Drill, Features New Lithium-Ion Technology (LXT), Two modes: Hammer with Rotation / Rotation only, 16 torque settings: delivers up to 440 in.lbs. of torque, Built-in L.E.D. light illuminates work area for greater accuracy, L.E.D. light stays… Learn More

Makita BDF452HW Drill, More compact design at only 8” long and weighs only 3.5 lbs. for less operator fatigue, All metal 2-speed transmission, Powerful 4-pole motor design with dual steel ball bearings, Batteries charge 4X faster in only 15 minutes,… Learn More

1/2" 18V Hammer Driver Drill, Powerful motor delivers up to 440 in./lbs. of torque, 16 torque settings for precise user control, Lithium-Ion technology provides longer run time and a 5x lower self-discharge rate, Two-speed gearing for more efficiency, Two built-in… Learn More

18.0 Volt Drill, The Metabo BSZ 18 offers Variospeed (V) electronics, It has a 20-level adjustable torque and can be used in a clockwise and anticlockwise rotation, The Drill has a quick-action key less chuck and spindle stop gear… Learn More

Drill/driver, Offers 20-level adjustable torque with a clockwise and anticlockwise rotation, The quick stop allows for rapid fastening of screws, The vibration absorbing rubber-coated handle allows for a comfortable non-slip grip, Cordless reciprocating saw, offers saw blade that can… Learn More

Drill/driver, 20-level adjustable torque, clockwise and anticlockwise rotation, quick stop for rapid fastening of screws, vibration absorbing rubber-coated handle for a comfortable non-slip grip, Cordless reciprocating saw, saw blade that can be rotated through 180� for working comfortably overhead,… Learn More

Now the 3/8" Milwaukee compact drill/driver comes with the new 12 volt work radio in one kit with two batteries and a charger. 

Learn More

The 2290-23 M12™ cordless 2-tool combo kit includes the SUB-SCANNER™ Detection Tool (2290-20) and Screwdriver (2401-20).

Learn More

Tired of Manufacturer's kits not having the tool you want in them?  Now you can build your own Milwaukee™ M12™ 12V cordless tool kit.

Learn More

Now you can get the M18™ Cordless 1/2" Hammer Drill Driver and the M18 Sawzall® Reciprocating Saw in one combo kit with two batteries, a charger and a contractors bag.

Learn More

The Milwaukee™ 2490-23 is a three tool combo kit consisting of a 1/4" Impact driver, a compact drill-driver, and a flashlight.  The kit also comes with two compact lithium-ion batteries, a 30-minute charger and carrying case. 

Learn More

The 2276-23 M12™ cordless 2-tool combo kit that is made up of the Laser TEMP-GUN™ Cordless Thermometer (2276-20) and Screwdriver (2401-20).  The kit also includes 2 M12™ lithium-ion batteries, a 30 minute charger, and carrying case.

Learn More

The Milwaukee™ 2697-22 is a two tool combo kit that brings together the popular M18™ 1/2" hammer drill/driver and the M18™ 1/4" hex drive impact driver in one kit.  This deal saving kit also comes with two high capacity lithium ion batteries, a charger and contractors bag.    

Learn More

Hammer-Drill, Milwaukee-built motor provides up to 495 in.-lbs. of torque, All-metal ratcheting chuck with carbide jaws for the highest grip torque on bits, Milwaukee's exclusive reversible battery allows users to adjust balance and get into tight spaces, Up to 50%… Learn More

1/2" Hammer Drill, High output motor provides 550 in-lbs. of torque, Patented reversible battery allows drill to fit in tight areas and optimizes balance while working overhead, 1/2 in. metal ratcheting chuck with carbide jaws provides superior bit grip, Tool… Learn More

V18&trade Drill, High output motor provides 550 in-lbs. of torque, Patented reversible battery allows drill to fit in tight areas and optimizes balance while working overhead, 1/2 in. metal ratcheting chuck with carbide jaws provides superior bit grip, Tool is… Learn More

This four tool 18 volt cordless tool combo kit from Milwaukee includes 2 2.4Ah batteries, a hammer-drill, a Sawzall™ Hatchet® reciprocating saw, and a 6-7/8" metal cutting circular saw.

Learn More

V28&trade 1/2" Hammer-Drill/Driver, Heavy-duty 2 speed gear box: 0-600/0-1800rpm, 0-9000/0-27000bpm, Consistent power from the first hole to the last, 600 in. lbs. of torque, Ratcheting, single-sleeve chuck with carbide jaws, Clip-Lok&trade system secures tool to belt with one hand, V28&trade… Learn More

Hammer-Drill, Clip-Lok&trade system secures drill to tool belt, with one hand release feature, Metal hammer selector for added durability, Ratcheting, single-sleeve chuck with carbide jaws for superior gripping strength, Reversible Battery pack allows user to change drill balance for overhead… Learn More

M-Spector (2310-20), The digital camera technology delivers a higher resolution and clear picture quality, The exclusive adjustable digital zoom of up to 200% allows you to get precise picture focus for quick assessment of problems, The 2.4" high-resolution 320 by… Learn More

2401-20 Sub-Compact Driver Drill, 25 percent more powerful then the competition with 100 in.lbs of Torque, 30 percent more run-time then the competition with the ability to drive up to 130 3" screws, Faster than competition with 0-500 rpm, Fuel… Learn More

2401-20 Sub-Compact Driver Drill, 25 percent more powerful then the competition with 100 in.lbs of Torque, 30 percent more run-time then the competition with the ability to drive up to 130 3" screws, Faster than competition with 0-500 rpm, Fuel… Learn More

1/4" Hex Impact Driver, Has a variable speed trigger that allows you control the speed of impact from 0-2,000 RPM, The battery fuel gauge displays the remaining run-time on the battery so you know when you need to recharge… Learn More

2401-20 Sub-Compact Driver Drill, 25 percent more powerful then the competition with 100 in.lbs of Torque, 30 percent more run-time then the competition with the ability to drive up to 130 3" screws, Faster than competition with 0-500 rpm,… Learn More

2611-20 High Performance Hammer-Drill/Driver, Designed with a Milwaukee™ 4-Pole Frame-less motor that operates with greater efficiency over an increased run-time, The 1/2" single-sleeve ratcheting metal chuck with carbide jaws allow for tool less bit changes, The on-board battery fuel… Learn More

2611-20 High Performance Hammer-Drill/Driver, Designed with a Milwaukee� 4-Pole Frame-less motor that operates with greater efficiency over an increased run-time, The 1/2" single-sleeve ratcheting metal chuck with carbide jaws allow for tool less bit changes, The on-board battery fuel gauge… Learn More

2601-22 Compact Drill, High torque with 400 in. lbs., Fuel gauge lets you easily see how much battery life is left for your job, Built in LED light illuminates work area making it easier to see in dark tight spots,… Learn More

2601-22 Compact Drill, High torque with 400 in. lbs., Fuel gauge lets you easily see how much battery life is left for your job, Built in LED light illuminates work area making it easier to see in dark tight spots,… Learn More

2611-20 High Performance Hammer-Drill/Driver, Designed with a Milwaukee� 4-Pole Frame-less motor that operates with greater efficiency over an increased run-time, The 1/2" single-sleeve ratcheting metal chuck with carbide jaws allow for tool less bit changes, The on-board battery fuel gauge… Learn More

1/2" Hammer-Drill/Driver, 4-pole motor delivers 550 in-lbs of peak torque and 29,000 BPM , Up to 20% faster in concrete than the competition, Variable speed trigger provides speed control between 0-1,700 RPM (High Speed) & 0-450 RPM (Low Speed),… Learn More

Tired of Manufacturer's kits not having the tool you want in them?  Now you can build your own Panasonic™ Revolithium™ 14.4V cordless tool kit.

Learn More

Drill/driver, Has 390 in/lbs. of instant power, Uses a 1/2 inch keyless chuck, and has 18 stages of clutch settings, Metal saw, Cuts with cool-reduced heat buildup due to the unique design of the cutting blade, Uses 3100 RPM for… Learn More

Metal Cutter, Rotates at 3,600 RPM, Blade is 5-3/8 C-6 tungsten steel carbide-tipped with 30 teeth and a 1/16 thin kerf, Blade uses chipping action for a quicker cut, Cuts clean with no need for de-burring after cutting, Adjustable base… Learn More

Reciprocating Saw, Powerful cutting capability for the toughest demolition jobs, Ergonomic balanced tool body with 2-finger pulling trigger switch, Comfortable operation for extended periods of time, 2-finger trigger switch for fitting into the tightest spots, Keyless blade clamping system allows… Learn More

EY3551GQ 18Volt Wood Saw, The electric brake ensures that the blade stops spinning when the trigger is release, The in-line ergonomic design ensures a comfortable cutting experience allowing for longer work hours, High speed capabilities with the specially designed blade… Learn More

EY3551GQ 18Volt Wood Saw, The electric brake ensures that the blade stops spinning when the trigger is release, The in-line ergonomic design ensures a comfortable cutting experience allowing for longer work hours, High speed capabilities with the specially designed blade… Learn More

EY3552GQW 18 Volt 3.5Ah Ni-MH Metal Saw, Ideal for cutting conduit, hanger rail, SPC, and plastic pipe, In- Line ergonomic design for comfortable cutting, Electric brake, Shaft lock button for easy blade replacement, Safety switch lock lever keeps tool from… Learn More

14.4 Volt Drill-Driver, 30% lighter than the 15.6v EY6432G but matching its power output of up to 390 in.lbs. of torque, Improved Ergonomic design to reduce fatigue, The Lithium Cobalt cells used in the battery packs offer high efficiency and… Learn More

RevoLithium™ 14.4V Drill and Driver, 30% lighter than the 15.6v EY6432G but matching its power output of up to 390 in.lbs. of torque, Improved Ergonomic design to reduce fatigue , Built in LED Light illuminates work area, Electronic Performance… Learn More

Drill Driver, Has 2-speed gearbox for tough jobs, high gear provides faster RPM for fast drilling, while low gear offers high torque for heavy-duty screwdriving applications, High performance motor and gearbox delivers up to 440 in. lbs. of torque, Integrated… Learn More

Drill Driver, Has 2-speed gearbox for tough jobs, high gear provides faster RPM for fast drilling, while low gear offers high torque for heavy-duty screwdriving applications, High performance motor and gearbox deliver up to 440 in. lbs. of torque, Integrated… Learn More

The Skil 2895LI-15 is engineered to deliver the high-performance and durability that today's growing population of Do-It-Yourselfers demand.

Learn More

The Skil 2895LI 20 18V Cordless Lithium Ion 4 Tool Combo Kit is lightweight and powerful enough to help you around the house as well as the job site.

Learn More