ToolBarn.com

Used for Kearney PH2 type dies, New head designs result in lower weight and improved durability (tested to 50,000 crimp cycles), Two-speed pump to reduce cycle time, Ram automatically retracts when crimp cycle is complete (a Greenlee exclusive), Comes with… Learn more about the Greenlee 7196

Patented friction drive, Cutting blades automatically open when the cut is complete, Cutting head rotates 350 degrees for access to tight spaces, Tool completes approximately 80 cutting cycles per battery charge (Note: Cutting 500 kcmil cable requires two cycles per… Learn more about the Greenlee 12114

Can Cut cable tray wires in 2 seconds, Cutting head is small and rotates 330° so you can easily get into the right cutting position, Tool automatically retracts when a cut is complete, and can be retracted in mid-stroke if… Learn more about the Greenlee 19984

One handed operation is easy due to the slim profile and lightweight design, Crimping jaws automatically open to signal that crimp is complete, Crimping jaws can be opened in mid-cycle to adjust connector, Interchangeable crimping jaws rotate 350 degrees, Two… Learn more about the Greenlee 23593

Cuts 500 kcmil (MCM) copper cable in 8 seconds, Compact design allows you to cut cables in tight spaces, Extra-heavy blades for a clean cut and longer blade life, Make approximately 20 cuts in 750 kcmit (MCM) per battery charge,… Learn more about the Greenlee 45380

Utilizes four indenter heads to make the crimp, Two-speed pump advances the ram quickly to start the crimp, reducing crimp completion time, The ram automatically retracts after the crimp is complete, Lightweight, featuring an angled pistol grip and a 360°… Learn more about the Greenlee EK06AT11