ToolBarn.com

The Hitachi™ CS33ET14 14" Top Handle Chain Saw has been redesigned for maximum strength and comfort, this new design features a top handle which is ideal for homeowners and light-duty professional use.

Learn more about the Hitachi CS33ET14

This professional grade, powerful chain saw is a versatile tool for a variety of projects backed by a 7 year customer use warranty.

Learn more about the Hitachi CS40EA18

Heavy duty tasks are no match for the ICS® PowerGrit® Hydraulic Powered Chainsaw with 20" Bar and Chain (537970). Powered by an 11.4 HP engine, it boasts Force4 technology and is the ideal tool for tough cutting applications.

Learn more about the ICS 537970

Heavy duty tasks are no match for the ICS® Powergrit® Gas Powered Chain Saw with 16" Bar (545018). Powered by a 2-stroke, 6.4 HP engine, it is capable of cutting ductile iron pipe.

Learn more about the ICS 545018

Heavy duty tasks are no match for the ICS® PowerGrit® Hydraulic Powered Chainsaw with 15" Bar and Chain (546113). Powered by an 11.4 HP engine, it boasts Force4 technology and is the ideal tool for tough cutting applications.

Learn more about the ICS 546113

This 680GC concrete chainsaw (545058) comes with the 12" guidebar and the 12"  TwinMax ™ diamond chain.

Learn more about the ICS 680GC12

This 680GC concrete chainsaw (545099) comes with the 14" guidebar and the 14"  TwinMax ™ diamond chain.

Learn more about the ICS 680GC14

Rugged cast cylinder, Low noise operation, Easy maintenance, Double air filtration, Efficient cold weather operation, High power-to-weight ratio, Learn more about the Makita DCS34

Automatic half throttle lock for easy starting, Lateral chain tensioning for quick and convenient chain adjustment, Easy clean chain compartment, clears chips efficiently, "Tool-less" filter maintenance for operator efficiency, Learn more about the Makita DCS510-18

Rugged cast cylinder, Low noise operation, Easy maintenance, Double air filtration, Efficient cold weather operation, High power-to-weight ratio, Learn more about the Makita DCS6421-20

The DPC7331 14" Industrial Power Cutter from Makita™ has features designed to make cutting concrete easier on the end user such as a built in microchip controlled ignition system that is designed to compensate engine timing and match it to the work load and a 2-mass dampening system that helps reduce the vibrations felt by the operator. 

Learn more about the Makita DPC7331

The DPC8132 16" Power Cutter from Makita™ has features designed to make cutting concrete easier on the end user such as a built in microchip controlled ignition system that is designed to compensate engine timing and match it to the work load and a 2-mass dampening system that helps reduce the vibrations felt by the operator.

Learn more about the Makita DPC8132

Reliable and powerful 5 1/2 hp gas engine, Includes a belt driven, self-priming centrifugal water pump, Innovative "shock-absorbing" engine mounts for smooth operation, Shaft systems utilize Micro-V� belts and precision machined pulleys for optimum power & longevity, Convenient ON/OFF… Learn more about the MK Diamond 159885

Heavy-duty 1" dual blade shaft assembly with self-aligning pillow block bearings to ensure accurate cutting on either left or right side, One-piece box construction chassis made from 3/16" hot-rolled steel will not flex during operation, Durable 8" x 2-1/4"… Learn more about the MK Diamond MK-1608HPREMIUM

Heavy-duty 1" dual blade shaft assembly with self-aligning pillow block bearings to ensure accurate cutting on either left or right side, One-piece box construction chassis made from 3/16" hot-rolled steel will not flex during operation, Durable 8" x 2-1/4" non-slip… Learn more about the MK Diamond MK-1608HSTANDARD

Heavy-duty 1" dual blade shaft assembly with self-aligning pillow block bearings to ensure accurate cutting on either left or right side, One-piece box construction chassis made from 3/16" hot-rolled steel will not flex during operation, Durable 8" x 2-1/4" non-slip… Learn more about the MK Diamond MK-1613HPREMIUM

Heavy-duty 1" dual blade shaft assembly with self-aligning pillow block bearings to ensure accurate cutting on either left or right side, One-piece box construction chassis made from 3/16" hot-rolled steel will not flex during operation, Durable 8" x 2-1/4" non-slip… Learn more about the MK Diamond MK-1613HSTANDARD

Industrial style 1-1/4" blade shaft assembly supported by two heavy-duty, self-aligning pillow block bearings with easy access grease fittings, Depth feed gauge indicator, Built-in Hour/tachometer displays both engine/blade shaft RPM. Hour meter monitors total engine run time, Powder-coated chassis… Learn more about the MK Diamond MK-2012KE

Industrial style 1-1/4" blade shaft assembly supported by two heavy-duty, self-aligning pillow block bearings with easy access grease fittings, Depth feed gauge indicator, Built-in Hour/tachometer displays both engine/blade shaft RPM. Hour meter monitors total engine run time, Powder-coated chassis… Learn more about the MK Diamond MK-2012KSP

Industrial style 1-1/4" blade shaft assembly supported by two heavy-duty, self-aligning pillow block bearings with easy access grease fittings, Depth feed gauge indicator, Built-in Hour/tachometer displays both engine/blade shaft RPM. Hour meter monitors total engine run time, Powder-coated chassis resists… Learn more about the MK Diamond MK-2013HE

Industrial style 1-1/4" blade shaft assembly supported by two heavy-duty, self-aligning pillow block bearings with easy access grease fittings, Depth feed gauge indicator, Built-in Hour/tachometer displays both engine/blade shaft RPM. Hour meter monitors total engine run time, Powder-coated chassis resists… Learn more about the MK Diamond MK-2013HSP

Industrial style 1-1/4" blade shaft assembly supported by two heavy-duty, self-aligning pillow block bearings with easy access grease fittings, Depth feed gauge indicator, Built-in Hour/tachometer displays both engine/blade shaft RPM. Hour meter monitors total engine run time, Powder-coated chassis resists… Learn more about the MK Diamond MK-2020HSP

Industrial style 1-1/4" blade shaft assembly supported by two heavy-duty, self-aligning pillow block bearings with easy access grease fittings, Depth feed gauge indicator, Built-in Hour/tachometer displays both engine/blade shaft RPM. Hour meter monitors total engine run time, Powder-coated chassis resists… Learn more about the MK Diamond MK-2020KSP

Industrial style 1-1/4" blade shaft assembly supported by two heavy-duty, self-aligning pillow block bearings with easy access grease fittings, Depth feed gauge indicator, Built-in Hour/tachometer displays both engine/blade shaft RPM. Hour meter monitors total engine run time, Powder-coated chassis… Learn more about the MK Diamond MK-2024HSP