Signup for emails and get $10 off your next purchase over $200Click To Signup

Free Shipping
Powermatic 1791284 TS29 7-1/2HP 3PH 230/460 Volt Shaper with Sliding Table Powermatic 1791284 TS29 7-1/2HP 3PH 230/460 Volt Shaper with Sliding Table
Powermatic

Powermatic 1791284 TS29 7-1/2HP 3PH 230/460 Volt Shaper with Sliding Table

SKU 1791284

MSRP: $10,353.00

$8,626.99 $
Powermatic Powermatic 1791284 TS29 7-1/2HP 3PH 230/460 Volt Shaper with Sliding Table

SKU 1791284

Get power and durability in one machine with this TS29 7-1/2HP 3PH 230/460 Volt Shaper with Sliding Table (1791284) from Powermatic. Powered by a 7-1/2 HP motor, it has a sliding table with a 4' stroke that works with the miter head, hold-down and fence to accomodate everything from multiple end cuts to tenons.

Availability: Ships In 2-3 business days - Excludes California. See Details

Get power and durability in one machine with this TS29 7-1/2HP 3PH 230/460 Volt Shaper with Sliding Table (1791284) from Powermatic. Powered by a 7-1/2 HP motor, it has a sliding table with a 4' stroke that works with the miter head, hold-down and fence to accomodate everything from multiple end cuts to tenons.

Print

Product Overview

Powermatic TS29 7-1/2HP 3PH 230/460 Volt Shaper with Sliding Table

SKU 1791284

Get power and durability in one machine with this TS29 7-1/2HP 3PH 230/460 Volt Shaper with Sliding Table (1791284) from Powermatic. Powered by a 7-1/2 HP motor, it has a sliding table with a 4' stroke that works with the miter head, hold-down and fence to accomodate everything from multiple end cuts to tenons. Its fully adjustable fence allows for dual digital readout for fast, accurate set-up and repeatability. It has a large table with built-in slider with room for stock feeder. The 7" vertical spindle travel allows stacked tooling. Plus, the spindle tilts negative 5° to positive 45° for increased versatility.

  • Sliding table with 4' stroke works with miter head, hold-down and fence to accommodate everything from multiple end cuts to tenons
  • Fully adjustable fence with dual digital readout for fast, accurate set-up and repeatability
  • Large table with built-in slider with room for stock feeder
  • 7" vertical spindle travel allows stacked tooling
  • Spindle tilts negative 5° to positive 45° for increased versatility
  • Large diameter multiple table inserts accommodate virtually any size cutter
  • 5 spindle speeds in forward and reverse with lighted indicator
In The Box
  • One (1) TS29 7-1/2HP 3PH 230/460 Volt Shaper with Sliding Table

Specifications

Display SKU 1791284
UPC / ISBN 662755464232
Brand Powermatic
Shipping Weight 1100.0000
Condition New
Product Weight (lbs.) 1100.00 Pounds
Manufacturer's Warranty 1 Year
Return Policy Unopened Only, 30 Days
Addl Specs
  • Spindle Speed: 3,000, 4,000, 6,000, 8,000 and 10,000 RPM
  • Reversible: Yes
  • Spindle Diameter: 3/4, 1 and 1-1/4 Inches
  • Spindle Size Under Nut: 3/4 (3-1/2), 1 (6-1/4) and 1-1/4 (6-1/4) Inches
  • Spindle Travel: 7
  • Tilting Spindle: 45 Degrees Forward, 5 Degrees Back
  • Table Size: 51-1/2 x 33-1/2 Inches
  • Fence Size (LxH): 46 x 5 Inches
  • Fence Travel (Major and Minor): 5-3/8 and 3-5/8 Inches
  • Slide Table Size (L x W): 11-1/4 x 51-1/4 Inches
  • Table Travel: 49-1/4 Inches
  • Table Inserts: 1 Tilting, 2 Straight
  • Maximum Diameter Cutter Below Table: 9 Inches
  • Maximum Diameter Cutter Above Table: 12 Inches
  • Router Bit Collet Diameter: 1/4 and 1/2 Inch
  • Dust Port Outside Diameter: 5 Inches (Dual Ports)
  • Dust Collection Minimum CFM Required: 800 cu.ft/min
  • Electrical Controls-Magnetic Starter: Yes
  • Motor Power: 7-1/2 HP
  • Motor Voltage: 230/460 Volts
  • Prewired Voltage: 230 Volts
  • Motor Phase: 3 Ph
  • Height: 53 Inches
  • Width: 44 Inches
  • Length: 51 Inches
Package Type Individual
Power Source Electric - Corded

Reviews / Q&A

Questions

Reviews