Calculated Industries 6260

The Ultra Scale Master® Pro is an affordable and portable area takeoff and digitizing system.

Unlike expensive digitizers, the Ultra Scale Master® Pro allows you to measure plans at your office or on the job site without the need for additional computing devices or software.

The ergonomic design with large targeting window allows you to accurately measure and compute areas, segment lengths, perimeters, and volumes for simple or complex polygons, polylines, irregular shapes, arcs and circles.

72 built-in architectural and engineering scales allow you to measure plans and drawing up to 24" x 36" in size. Four custom scales allow you to measure out of scale drawings.

The Ultra Scale Master® Pro can operate as a stand alone digital area takeoff tool, or you can connect it to your PC to transfer measurements into any estimating and spreadsheet program that accept text input from a number pad or keyboard. It also can send digitized (x,y) coordinates to takeoff software programs like our Smart Takeoff! graphic digitizing software.

• Stand Alone Operation can measure and display line lengths, areas, perimeters, volume, wall areas, arc lengths, radius and diameter without the use of a PC
• PC Input Mode can send displayed values to your spreadsheets and estimating software programs via supplied USB cable (no special USB driver software needed)
• Digitizer (x,y) Coordinate Entry can send coordinates to graphic digitizing software like our Smart Takeoff! program
• Device can measure simple or complex polygons, polylines, irregular shapes, arcs and circles
• Measure all polygon points and automatically find area, line lengths, perimeter and volume
• Measure two or more points and automatically get segment length, total length and wall area
• Measure all points on the curved shape and automatically find area, perimeter and volume
• Measuring the starting point, high point and finishing point of the arc and automatically get area, perimeter, arc length, volume, and wall area
• Select any three points on the circle and automatically get area, perimeter, volume, radius and diameter
• Ergonomic shaped measuring device and large targeting window gives you point-to-point measuring accuracy
• Easy to read LCD display
• 72 built-in scales or create custom scales for out-of-dimension drawing and plans
• Imperial or Metric Mode
• Change units of measure of any displayed value at any time
• Easily recall line lengths and computed measurements for current measured shape
• Enter a stored Height and get volume and wall area calculations
• Operates on 4 – AAA batteries (included) or from USB Cable when connected to PC
• Automatic Shut-Off saves battery life

• Display Total Measurements or last segment measured
• Beep sound control
• US/Euro value display
• PC Send Display after data is sent to the PC
• PC data terminating command settings allow you to control spreadsheet cell direction
• Set Right Hand or Left Hand Digitizer mode
• USB Send Delay control for slower computers

• Operating Systems Supported: Windows® 2000 or XP
• Computer Interface: USB 1.1 and 2.0 compatible HID Mode via,supplied 10 ft. (3.048 m) cable
• Bar Specifications :
• Footprint: 3.79 x 7.63 x 1.13 inch (98.4 x 193.6 x 28.5 mm)
• Active Measurement Area: 24 x 36 inch (610 x 914 mm) (re-configurable)
• Weight: 7 oz (200 grams)
• Puck Specifications :
• Footprint: 3.79 x 7.63 x 1.13 inch (98.4 x 193.6 x 28.5 mm)
• Weight: 7 oz (200 grams)
• Power Source: USB power when connected to PC, 4 “ AAA” batteries when used as stand alone device
• Range: Up to 36 inches
• Accuracy: ± 0.040 inch (± 0.1016 cm)
• Operating Temperature: 41 to 104° F (5 to 40° C)
• Storage Temperature: 14 to 122° F (-20 to 60° C)
• Humidity Range: 0 to 95%, non-condensing
• Warranty: 1-year limited warranty and 30-day Money-Back Satisfaction Guarantee
• Patent: PATENT PENDING

• Calculated Industries 6230-CI