Delta 14-651 Deluxe Bench Top Mortising Machine

Features

Easy and open access to drill chuck for bit changing
Adjustable depth stop
Multi-position feed lever
Chuck key/hex wrench for bit and chisel changing
Large cast-iron base with center through hole
Mortising head column can be turned 180 derees and remounted for off-table mortising
Adjustable dovetail way on mortising head
Tool and chisel tray
Adjustable rack and pinion fence and rack and pinion head raising and lowering
Gas-filled head stablizer
Height attachment adds 1 3/4" of capacity under head

Specs

Capacities

Chuck: 3/8"
Chisel Sizes: 1/4" X 1/4", 5/16" X 5/16", 3/8" X 3/8", 1/2" X 1/2"
>(5/8" max. dia. shank)
Max. stroke: 5"
Under head to base: 9 3/8"
Chisel center to fence: 3 3/4"
Under hold down: 3 3/4"

General

Motor: 1/2 HP, 1725 rpm
Head Travel: 5"
Base Size: 16-1/4" x 13-1/2"
Fence Size: 2 15/16" X 5 13/16" ea. side
>13 5/8" overall
Base Size: 16-1/4" x 13-1/2"
Height: 30"
Width: 13 1/2"
Depth: 16 1/4"

Shipping weight: 78.00 lbs.

In The Box

3/8" Capacity chuck and key
Four mortising chisels and bits
Tool and chisel holder
Riser block
Instruction manual

1 Review

Show all reviews | Add a review

1 Review
Overall Rating:

4.5

Add a Review

Reviews

"$5.00 bushing can make this perfect" Submitted on February 23rd, 2008

Average Rating: 4.5

Features

4

Performance

5

Reliability

5

Value

4

Pros: Steel base
Cons: only accepts 5/8" shank chisels?

Comments:
I have a few 3/4" shank chisels. The chisel bushing for the Delta 14-651 only accepts smaller 5/8" shank (Delta) chisels.

A $5.00 3/4" bushing would give this machine additional flexibility and make it a better value.

- Chuck P

Back to Top

Delta 14-651

Deluxe Bench Top Mortising Machine

Features

Specs

In The Box

1 Review

Need more information on the Delta 14-651?Call us Toll-Free at (866) 597-3850 or email sales@toolbarn.com.

Need more information on the Delta 14-651?
Call us Toll-Free at (866) 597-3850 or email sales@toolbarn.com.