DJ-20 8", 1-1/2 HP, 120/240 Volt, 60 Hz., Single Phase Motor, Precision Jointer
List Price: $3529.96 Your Price:
$1899.99
Normally ships in 14 - 20 business days
More details below...
Features
Unique parallelogram support system allows the table to move in the same area as the cutterhead when raised and lowered - This uniform, close clearance to the cutting blade acts as a more efficient chip breaker - Table supports (4 per table) are linear-extension, spring counterbalanced, adjustment is virtually effortless despite weight of cast-iron tables - Aluminum lips bolted to the main tables are replaceable to compensate for wear
The DJ-20's 8" cutting capacity is ample for the majority of wood widths available - Cast-iron base assures less vibration, cabinet stand completely encases motor and pulleys to protect from dust and shavings - Large panels allow easy access inside the stand if adjustment or repair is necessary - Built-in chip chute is designed for hook-up to a dust collection system if required
Big 4" x 12" rabbeting ledge supports work securely right at the cutterhead - Note how center-mounted fence acts as a rear guard when fence is moved forward to table edge
Specially-designed cast-iron fence is extra long for continued support throughout the cut - Fence is center-mounted and functions as a rear guard on narrow cuts - Positive stops 45 degrees in and out for accurate chamfering and beveling - scale in back measures angle set - Handy stock scale mounted at the end of fence measures jointed stock prior to planing in English or Metric
Extra-long infeed table provides a full 42" of work support - Unique diamond ribbing ensures that weight is best distributed throughout the length - Height adjustment lever and locking handle facilitate repetitive jointing
Modular cutterhead provides a consistently clean cut - Three knives operate at 5500 rpm - 16,500 cuts per minute for a smooth finish - Cutterhead knives project only .020" above cutterhead surface to help reduce kickback of stock - Jack-screw arrangement allows easy replacement and adjusment of individual knives - In the event the entire cutterhead has to be removed, a new module can be fitted in place without production down-time
Specs
Cutting Capacity
Depth: 5/8"
Rabbeting Capacity: 5/8"
Cutterhead
Speed: 5500 rpm, 16,500 CPM
Number of knives: 3
Diameter: 3 3/8"
Table
Length: 76 1/2"
Length of rear table (outfeed): 32"
Length of front table (infeed): 42"
Height from floor: 32"
Fence
Size: 5" x 35"
Tilts in and out: 45 degrees
Positive Stops: 90 & 45 degrees in and out
General
Motor: 1 1/2 HP
Cutting Capacity (max. width): 8"
Cuts Per Minute: 16,500
Motor (enclosed stand): 120/240V, 60 Hz., single phase TEFC, 3450 rpm
Call Toll Free
