TIPS: For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto. Start your work with coarse bands and finish with finer grits. Use a slow speed with this accessory and keep a very light touch for more effective sanding.
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8" shank
The replaceable band covering the cylinder is coarse 60 grit
Specs
Shank: 1/8"
Grit: 60
Collets For: #480 1/8" Collet #585 1/8" Collet
Shipping weight: 0.25 lbs.
Applications
Ideal for rough-shaping and smoothing wood and fiberglass-as well as removing rust from metal surfaces, shaping rubber surfaces and more.
