3/8" X 6" High Strength Threaded Anchor (Box of 50)
List Price: $58.50 Your Price:
$36.60
Currently 2 In Stock
Features
Higher load capacity and vibration resistance: Threads along the length of the anchor efficiently transfer the load to the base material
Ratchet teeth on the underside of the hex-washer head help prevent the anchor from loosening in vibratory conditions Specialized Heat Treating Process: Creates superior surface hardness at the tip to facilitate cutting, while at the same time not compromising ductility within the anchor body
Less spacing and edge distance required: The anchor does not exert expansion forces on the base material
Easy post-installation inspection: The head is stamped with the Simpson sign and the anchor length in inches
Material Carbon steel, heat treated
New Property Zinc plated or mechanically galvanized
Screw anchors shall have 360-degree contact with the base material and shall not require oversized holes for installation
Fasteners shall be manufactured from carbon steel, and are heat-treated
Anchors shall be zinc plated in accordance with ASTM B633 Anchors are not to be reused after initial installation Screw anchors shall be Titen HD anchors from Simpson Strong-Tie, Dublin, CA. Anchors shall be installed per Simpson Strong-Tie's instructions for the Titen HD
No special drill bit needed: Designed to install using standard sized ANSI tolerance drill bits
Installs with 50% less torque: Testing shows that when compared to competitors, the Titen HD requires 50% less torque to be installed in concrete
The serrated teeth on the lead threads facilitate cutting, allowing the remainder of the threads to follow with very little friction. This enables the user to install the anchor using wrenches or cordless tools
Less installation time: No secondary setting or torquing is required
Hex-washer head: Requires no separate washer and provides a clean installed appearance
Removable: Ideal for temporary anchoring (e.g. form work, bracing) or applications where fixtures may need to be moved
Re-use of the anchor to achieve listed load values is not recommended
