Simpson Strong-Tie Anchor Systems WA503344SS

SUGGESTED SPECIFICATIONS: Wedge anchors shall be a threaded stud with an integral cone expander and a single piece expansion clip. The stud shall be carbon steel with a minimum 70,000 psi tensile strength, or type 303, 304 or 316 stainless steel, as called for on the drawings. Anchors shall meet Federal Specification A-A-1923A, Type 4. Anchors shall be Wedge-Alls from Simpson-Strong Tie, Dublin, CA. Anchors shall be installed following Simpson Strong-Tie's instructions for Wedge-Alls.

NOTE: The published length is the overall length of the anchor. Allow one anchor diameter for the nut and washer thickness plus the fixture thickness when selecting the minimum length.

• One piece wrap around clip
• Threaded end is chamfered for ease of starting nut
• Most sizes feature full thread for added versatility