SKU 428
Use this Carbon Steel Brush with your Dremel rotary tool for removing rust and corrosion from brass, copper and other soft, ferrous metals. (428)
- Versatile carbon steel brush for use with Dremel rotary tools
- Cleans and removes rust from items made of brass, copper and other soft, ferrous metals
- Ideal for cleaning tools, door knobs, automobile pars and electrical contacts
- Creates an artistic texture on coarse-grained
- Perfect for cleaning flat surfaces and hard-to-reach places
TIPS: For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto. Do not run in excess of 15,000 rpm. (Therefore, do not use with a Single-Speed MultiPro Rotary Tool or a Heavy-Duty Flex-Shaft Tool unless you use the #221 Foot Speed Control.) Keep a light touch, letting the tips of the brush do the work. Too much pressure can break the wire bristles. Before using on a material, allow the tool with brush to run at operating speed for at least one minute to discharge any loose wire bristles. Make sure no one stands in front of or in line with the brush.
In The Box
- One (1) Wire Brush
Warning: Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: Click Here