Dremel 535 Brass Brush Dremel 535 Brass Brush

Dremel 535 Brass Brush

SKU 535

****This Product is No Longer Available On Toolbarn****

Click below to view similar products or the replacement item.

Use this 3/4" Brass Brush with your Dremel rotary tool for cleaning and surface-finishing soft metals like gold, bronze, copper or brass. (535)

Product Overview

Dremel Brass Brush

SKU 535

  • Versatile brass brush for Dremel rotary tools
  • Cleans and surface-finishes items made of gold, bronze, copper or brass
  • Brass wire is non-sparking and softer than steel: won't scratch soft metals
  • Perfect for cleaning flat surfaces and hard-to-reach places

TIPS: For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto. Before using on a material, allow the tool with brush to run at operating speed for at least one minute to discharge any loose wire bristles. Make sure no one stands in front of or in line with the brush.

In The Box

One (1) Wire Brush

Warning: Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: Click Here


Display SKU 535
UPC / ISBN 080596010546
Brand Dremel
Safety Info

Do not run in excess of 15,000 rpm. Therefore, do not use with a Single-Speed MultiPro Rotary Tool or a Heavy-Duty Flex-Shaft Tool unless you use the #221 Foot Speed Control. Keep a light touch, letting the tips of the brush do the work. Too much pressure can break the wire bristles.

Shipping Weight 0.2500
Condition New
Manufacturer's Warranty Product Defects Only
Return Policy Unopened Only, 30 Days
Addl Specs
  • Bit Diameter: 3/4 inch (19.1 mm)
  • Shank Diameter: 1/8 inch (3.2 mm)
  • Bristle Material: Brass Wire
  • Color Code: Yellow
Package Type Individual