Free Shipping
Jet 320033 230/460 Volt 3HP Radial Drill Press (J-720R) Jet 320033 230/460 Volt 3HP Radial Drill Press (J-720R)
Jet

Jet 320033 230/460 Volt 3HP Radial Drill Press (J-720R)

SKU 320033

****This Product is No Longer Available On Toolbarn****

Click below to view similar products or the replacement item.


Jet has you the woodworker in mind with this J-720R 230/460V 3HP Radial Drill Press (320033). The powertrain gears and spline shafts are made of the finest quality, heat treated and ground nickel-chrome steel for impressive strength and durability.

Product Overview

Jet 230/460 Volt 3HP Radial Drill Press (J-720R)

SKU 320033

Jet has you the woodworker in mind with this J-720R 230/460V 3HP Radial Drill Press (320033). The powertrain gears and spline shafts are made of the finest quality, heat treated and ground nickel-chrome steel for impressive strength and durability. Capable of handing high torque loads, the spindle is supported by a double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top. It features 6 speeds and 3 feed rates, making exotic materials easier to drill, bore and tap. Plus, it has a handy built-in work light for maximum convenience.

  • Powertrain gears and spline shafts are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
  • Spindle is made of finest case hardened steel, for extra strength and wear
  • Spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
  • Build to withstand exceptionally heavy drilling and boring loads to insure maximum accuracy
  • Arm raising safety device prevents arm from dropping
  • Counter balanced mechanism for spindle return
  • 6 Speeds/3 Feed rates make exotic materials easier to drill, bore and tap
  • Centralized control center
  • Automatic tool ejector
  • Independent arm electric clamping system, which locks and unlocks the head and column
  • Push button controls are all reduced to 110VAC
  • Electrical circuits are located in the build-in control box at the rear of the arm. This keeps the controls dust-and-humidity-free while making them easily accessible for maintenance
  • Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobs
  • Built-in work light
In The Box
  • One (1) J-720R, 3HP, Radial Drill Press 230/460V - 320033
  • One (1) Coolant Pump
  • One (1) Tool Kit
  • One (1) Box Table

Warning: Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: Click Here

Specifications

Display SKU 320033
UPC / ISBN 662756093578
Brand Jet
Shipping Weight 2970.0000
Condition New
Product Weight (lbs.) 2970.00 Pounds
Manufacturer's Warranty 1 Year
Return Policy Return To Manufacturer Only
Addl Specs
  • Arm Travel Vertical: 23-13/16 Inches
  • Boring Capacity Cast Iron: 4 Inches
  • Boring Capacity Steel: 2-3/7 Inches
  • Column Diameter: 8-1/4 Inches
  • Coolant Pump Motor: 1/8 HP
  • Distance Base to Spindle (max/in.): 41-3/4 Inches
  • Distance Base to Spindle (min/in.): 9-5/8 Inches
  • Distance Column to Spindle (max/in.): 29-1/2 Inches
  • Distance Column to Spindle (min/in.): 8-5/8 Inches
  • Drilling Capacity: 1-1/2 Inches
  • Drilling Capacity Cast Iron: 2 Inches
  • Elevating Motor: 1 HP
  • Machine Height from Floor: 85-7/16 Inches
  • Motor: 3 HP, 3 Phase, 230/460 Volts
  • Number of Spindle Speeds: 6 (88 to 1500)
  • Quill Down Feed Rates (IPR): 0.002/0.004/0.006
  • Quill Travel: 8-1/4 Inches
  • Quill Travel with Powerfeed Engaged: 8-1/4 Inches
  • Spindle Taper: 4 MT
  • T-Slots Number and Size: 3, 3/4 Inch
  • Table Size: 23-5/8 x 17-1/2 x 15 Inches
  • Tapping Capacity Cast Iron: 1 Inch
  • Tapping Capacity Mild Steel: 3/4 Inch
  • Travel of Head Horizontal: 20-7/8 Inch
Package Type Individual
Power Source Electric - Corded