Free Shipping
Jet 320038 7.5 HP Radial Drill Press (J-1600R) Jet 320038 7.5 HP Radial Drill Press (J-1600R)
Jet

Jet 320038 7.5 HP Radial Drill Press (J-1600R)

SKU 320038

****This Product is No Longer Available On Toolbarn****

Click below to view similar products or the replacement item.


Jet has you the woodworker in mind with this J-1600R 7.5 HP Radial Drill Press (320038). The powertrain gears and spline shafts are made of the finest quality, heat treated and ground nickel-chrome steel for impressive strength and durability.

Product Overview

Jet 7.5 HP Radial Drill Press (J-1600R)

SKU 320038

Jet has you the woodworker in mind with this J-1600R 7.5 HP Radial Drill Press (320038). The powertrain gears and spline shafts are made of the finest quality, heat treated and ground nickel-chrome steel for impressive strength and durability. Capable of handing high torque loads, it also has a spindle that is supported by a double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top. It features 12 speeds and 3 feed rates, making exotic materials easier to drill, bore and tap. Plus, it has a handy built-in work light for maximum convenience.

  • Power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
  • Spindle is made of the finest case hardened steel for extra strength and wear
  • Spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top
  • Spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy
  • Push button controls are all reduced to 110V
  • Electrical circuits are located in the built-in control box at the rear of the arm- this keeps the controls dust and humidity free while making them easily accessible for maintenance
  • Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobs
  • Arm raising safety device prevents arm from dropping
  • Counter balanced mechanism for spindle return
  • 12 speeds/3 feed rates make exotic materials easier to drill, bore and tap
  • Centralized control center
  • Automatic tool ejector
  • Built in work light
In The Box
  • One (1) J-1600R 7.5 HP Radial Drill Press

Warning: Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: Click Here

Specifications

Display SKU 320038
UPC / ISBN 662756093523
Brand Jet
Shipping Weight 11240.0000
Condition New
Product Weight (lbs.) 11240.00 Pounds
Manufacturer's Warranty 1 Year
Return Policy Return To Manufacturer Only
Addl Specs
  • Arm Travel Vertical: 50 Inches
  • Boring Capacity Cast Iron: 7-3/8 Inches
  • Boring Capacity Steel: 5 Inches
  • Column Diameter: 17 Inches
  • Coolant Pump Motor: 1 HP
  • Distance Base to Spindle (max/in.): 63 Inches
  • Distance Base to Spindle (min/in.): 13 Inches
  • Distance Column to Spindle (max/in.): 63 Inches
  • Distance Column to Spindle (min/in.): 17 Inches
  • Drilling Capacity: 2-1/2 Inches
  • Drilling Capacity Cast Iron: 2-7/8 Inches
  • Elevating Motor: 2 HP
  • Machine Height from Floor: 124-58/64 Inches
  • Motor: 7-1/2 HP, 3 Phase, 230/460 Volts
  • Number of Spindle Speeds: 12 (40 - 1920)
  • Quill Down Feed Rates (IPR): 6 (0.003 - 0.038 IPR)
  • Quill Travel: 14-9/16 Inches
  • Quill Travel w/ Powerfeed Engaged: 13 Inches
  • Spindle Taper: 5 MT
  • T-Slots Number and Size: 3 and 7/8 Inch
  • Tapping Capacity Cast Iron: 2-3/8 Inches
  • Tapping Capacity Mild Steel: 2 Inches
  • Travel of Head Horizontal: 49-5/8 Inches
Package Type Individual
Power Source Electric - Corded