Free Shipping
Jet 414453 J-3230, 5" x 8" Horizontal Bandsaw (115V, 1 Phase) Jet 414453 J-3230, 5" x 8" Horizontal Bandsaw (115V, 1 Phase)
Jet

Jet 414453 J-3230, 5" x 8" Horizontal Bandsaw (115V, 1 Phase)

SKU 414453

****This Product is No Longer Available On Toolbarn****

Click below to view similar products or the replacement item.


Jet gives you power and durability with this J-3230 5" x 8" Horizontal Bandsaw (414453). Powered by a 1/2 HP motor, the hydraulic downfeed system aids in the ease of cutting while the built-in handle and wheels make mobility and transport a breeze.

Product Overview

Jet J-3230, 5" x 8" Horizontal Bandsaw (115V, 1 Phase)

SKU 414453

Jet gives you power and durability with this J-3230 5" x 8" Horizontal Bandsaw (414453). Powered by a 1/2 HP motor, the hydraulic downfeed system aids in the ease of cutting while the built-in handle and wheels make mobility and transport a breeze. Automatic shut-off after each cut adds a measure of safety while heat-treated steel worm gear and bronze drive gear help provide superior cuts with every flip of the switch.

  • For added safety, the motor and electrics follow strict guidelines and electrical requirements to be certified by CSA Group
  • Blade drive is a steel, heat treated worm driving a bronze worm gear in an oil bath
  • Adjustable blade guides with side eccentric shaft with ball bearings with rear-ball bearings
  • Fully adjustable hydraulic downfeed system
  • Wheels and handle for easy movement
  • Automatic shut-off after cut
  • Coolant system
  • 1/2" Carbon Steel Blade
  • Adjustable material stop
In The Box
  • One (1) J-3230, 5" x 8" Horizontal Bandsaw

Warning: Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: Click Here

Specifications

Display SKU 414453
UPC / ISBN 662756090959
Brand Jet
Shipping Weight 165.0000
Condition New
Product Weight (lbs.) 134.00 Pounds
Manufacturer's Warranty 2 Years
Return Policy Return To Manufacturer Only
Addl Specs
  • Cutting Capacity (Width x Depth): 5 x 8 Inches
  • Round at 90 Degrees: 5 Inches
  • Round at 45 Degrees: 4-1/2 Inches
  • Rectangle at 90 Degrees: 7-1/2 x 5 Inches
  • Rectangle at 45 Degrees: 4-1/2 x 5 Inches
  • Vise Swivels: 45 Degrees
  • Blade Speeds: 82, 125, 200 SFPM
  • Blade Wheel Diameter: 7-1/2 Inches
  • Blade Length: 68-1/2 Inches
  • Blade Size: 1/2 x .025 x 68 Inches
  • Bed Height: 23-1/2 Inches
  • Motor (Horsepower): 1/2 HP, 115V, 1Ph
  • Weight: 134 lbs.
  • Overall Dimensions (Length x Width x Height): 37 x 16 x 37 Inches
Package Type Individual
Power Source Electric - Corded