Free Shipping
Jet 414474 J-7020M, 10" x 16" Horizontal Mitering Bandsaw (115/230V, 1 Phase) Jet 414474 J-7020M, 10" x 16" Horizontal Mitering Bandsaw (115/230V, 1 Phase)
Jet

Jet 414474 J-7020M, 10" x 16" Horizontal Mitering Bandsaw (115/230V, 1 Phase)

SKU 414474

****This Product is No Longer Available On Toolbarn****

Click below to view similar products or the replacement item.


Jet gives you power and durability with this J-7020M, 10" x 16" Horizontal Mitering Bandsaw (414474). Powered by a 1-1/2 HP motor, the mitering head swivels to cut any angle to 45 degrees with the work piece remaining stationary while the variable speed drive system permits effortless fine-tuning of the blade speed.

Product Overview

Jet J-7020M, 10" x 16" Horizontal Mitering Bandsaw (115/230V, 1 Phase)

SKU 414474

Jet gives you power and durability with this J-7020M, 10" x 16" Horizontal Mitering Bandsaw (414474). Powered by a 1-1/2 HP motor, the mitering head swivels to cut any angle to 45 degrees with the work piece remaining stationary while the variable speed drive system permits effortless fine-tuning of the blade speed. Major saw controls are conveniently located on a swiveling control panel while a quick positioning vise cuts down on set up time.

  • Mitering head swivels to cut any angle 0° - 45° while the work piece remains secured
  • Swivel control panel houses major saw controls
  • Variable speed drive system allows the operator to easily fine tune the blade speed
  • Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
  • The blade rides on two load bearings mounted on a pivot shaft with the side bearings and carbide pads assisting in distributing the load equally
  • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
  • Heavy-Duty transmission utilizes hardened and ground gears operating in an oil bath
  • 1" Bi-Metal Blade
  • Adjustable material stop
  • Cast Iron blade wheels
  • Coolant System
In The Box
  • One (1) J-7020M, 10" x 16" Horizontal Mitering Bandsaw

Warning: Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: Click Here

Specifications

Display SKU 414474
UPC / ISBN 662756091017
Brand Jet
Shipping Weight 1134.0000
Condition New
Product Weight (lbs.) 1134.00 Pounds
Manufacturer's Warranty 2 Years
Return Policy Return To Manufacturer Only
Addl Specs
  • Cutting Capacity (Width x Depth): 10 x 16 Inches
  • Round at 90 Degrees: 10 Inches
  • Round at 45 Degrees: 8-1/2 Inches
  • Rectangle at 90 Degrees: 10 x 14; 2 x 16 Inches
  • Rectangle at 45 Degrees: 8-1/2 x 9 Inches
  • Vise Swivels: 45 Degrees
  • Head Movement: 45 Degrees
  • Blade Speeds: 100, 350 SFPM
  • Blade Wheel Diameter: 14 Inches
  • Blade Length: 135 Inches
  • Blade Size: 1 x .035 x 135 Inches
  • Bed Height: 25-1/2 Inches
  • Motor (Horsepower): 1-1/2 HP, 115/230V, 1Ph
  • Drive: Variable Speed
  • Weight: 1134 lbs.
  • Overall Dimensions (Length x Width x Height): 76 x 30 x 48 Inches
Package Type Individual
Power Source Electric - Corded