Free Shipping
Jet 690019 JTM-1 Milling Machine With X-Axis Powerfeed Jet 690019 JTM-1 Milling Machine With X-Axis Powerfeed
Jet

Jet 690019 JTM-1 Milling Machine With X-Axis Powerfeed

SKU 690019

****This Product is No Longer Available On Toolbarn****

Click below to view similar products or the replacement item.


Bring precision and reliability to bear on your next project with this JTM-1 Mill With X-Axis Powerfeed (690019) by Jet.

Product Overview

Jet JTM-1 Milling Machine With X-Axis Powerfeed

SKU 690019

Bring precision and reliability to bear on your next project with this JTM-1 Mill With X-Axis Powerfeed (690019) by Jet. It features a three-stage power downfeed with auto stop, along with an internally cooled spindle head that prevents seizing.

  • Meehanite Castings
  • Precision bored and honed milling head
  • Large diameter quill is chromed
  • High precision Class 7 spindle bearings
  • Spindle head is internally cooled
  • Satin chrome finished dials
  • Heavy duty splined motor drive
  • One piece quill pinion and shaft
  • Three stage power downfeed with automatic stop
  • Heavy duty spindle brake
  • Precision hardened and ground ways and table
  • Adjustable gibs throughout
  • Internal coolant tank built into base for use with coolant system (coolant pump not included)
  • Tolerance test sheet included
  • One shot lubrication system
  • Way covers
  • Draw bar
  • Tool box with tools
In The Box
  • One (1) JTM-1 Mill With X-Axis Powerfeed

Warning: Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: Click Here

Specifications

Display SKU 690019
UPC / ISBN 662755515903
Brand Jet
Shipping Weight 2100.0000
Condition New
Product Weight (lbs.) 2200.00 Pounds
Manufacturer's Warranty 2 Years
Return Policy Return To Manufacturer Only
Addl Specs
  • Spindle Taper (Inches x TPI): R-8
  • Powerfeed: X-Axis
  • Table Size (Length x Width): 9 x 42 Inches
  • Quill Diameter: 3-3/8 Inches
  • Number of Spindle Speeds: 16
  • Range of Spindle Speeds: 80 - 5,440 RPM
  • Quill Down Feed Rates: .0015 - .003 - .006 IPR
  • Spindle Travel: 5 Inches
  • Head Movement: 90 Degrees Right/Left; 45 Degrees Front/Back
  • Max Distance Spindle to Table: 17-1/2 Inches
  • Distance Spindle to Column (Maximum): 19 Inches
  • Distance Spindle to Column (Minimum): 4-1/2 Inches
  • Collet Capacity: 1/8 - 7/8 Inches
  • Table Longitudinal Travel: 23-7/8 Inches
  • Table Cross Travel: 12-1/2 Inches
  • T-Slots Number and Size: 3 - 5/8 Inches
  • T-Slot Center: 2-1/2 Inches
  • Work Table Weight Capacity (lbs): 550
  • Travel of Knee: 14-1/2 Inches
  • Travel of Ram: 13-3/8 Inches
  • Motor: 2 HP, 230V, 3Ph
  • Prewired (voltage): 230
  • Overall Dimensions (Length x Width x Height): 57 x 64 x 82 Inches
  • Weight (lbs): 2,200
Package Type Individual
Power Source Electric - Corded