Milwaukee
2" Thin Wall Carbide Tipped Core Bit - SDS+
SKU 48-20-5035
Milwaukee's carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 In. to 3-3/16 In. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 In. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 In. hole or smaller. Milwaukee carbide tipped core bits are available from 1 In. to 6 In. diameters.
- Thin wall design
- 2 In. diameter
- Usable cutting depth 2-13/16 In.
- Use with 8 In. or 12 In. SDS plus adapter shanks (48-03-3545, 48-03-3551)
In The Box
- One (1) 2" Thin Wall Carbide Tipped Core Bit
Downloads
Warning: Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: Click Here