Milwaukee 49-59-1187 1-3/16" x 1" HSS Annular Cutter Milwaukee 49-59-1187 1-3/16" x 1" HSS Annular Cutter
Milwaukee

Milwaukee 49-59-1187 1-3/16" x 1" HSS Annular Cutter

SKU 49-59-1187

****This Product is No Longer Available On Toolbarn****

Click below to view similar products or the replacement item.


1-3/16" x 1" HSS Annular Cutter

Product Overview

Milwaukee 1-3/16" x 1" HSS Annular Cutter

SKU 49-59-1187

  • Incorporates the industry standard shank diameter of 3/4"
  • The original tooth geometry is designed to perform cuts faster while also allowing for better centering
  • The thin wall design aids in the cutters speed and efficiency by removing less material during the drilling process
  • The shorter flute design allows for removed debris to fall freely away from the cutter
  • This Annular cutter is designed to cut a 1 inch deep hole that is 1-3/16 inches in diameter
  • The ejector pins can be used on all diameters Use 44-60-1720 for 1 in. depths and 44-60-1721 for 2 in. depths
  • The ejector pin extends a 1/2 inch beyond the tooth tip and allows for an easier and faster aligning on the hole
  • The ejector pins are sold separately
In The Box
  • One (1) 1-3/16" X 1" HSS Annular Cutter

Warning: Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: Click Here

Specifications

Display SKU 49-59-1187
UPC / ISBN 045242207602
Brand Milwaukee
Works With
  • Milwaukee: 4270-20, 4270-21, 49-57-0025, 4208-2, 4209-1, 44-60-1720, 49-32-0081
Shipping Weight 0.8000
Condition New
Manufacturer's Warranty Product Defects Only
Return Policy Unopened Only, 30 Days
Addl Specs
  • Diameter: 1-3/16 Inches
  • Length: 1 Inch
  • Shank Diameter: 3/4 Inch
  • Uses Ejector Pin: 44-60-1720
Application Ferrous Metal, Non Ferrous Metal
Drive Type Standard
Material High Speed Steel
Package Type Individual