Free Shipping

Powermatic 1792000K 3HP 1PH 10" Table Saw w/ 50" Accu-Fence System (PM2000)


Powermatic 1792000K 3HP 1PH 10" Table Saw w/ 50" Accu-Fence System (PM2000)

SKU 1792000K

****This Product is No Longer Available On Toolbarn****

Click below to view similar products or the replacement item.

Product Overview

Powermatic 3HP 1PH 10" Table Saw w/ 50" Accu-Fence System (PM2000)

SKU 1792000K

The award winning PM2000 tablesaw sets a new standard for innovation with an array of patented features and massive body design. It boasts the heaviest cast iron base in its class that virtually eliminates table vibration. The push button arbor lock is accessible from above the table top to eliminate the need for dual arbor wrenches. The quick release riving knife design helps to reduce the chance of kickback. Built-in retractable four piece omni-directional caster system (patent pending) mobilizes your tablesaw. A wide stance, heavy-duty, one piece trunnion has a C-face mounted motor, relieving weight at the saw arm pivot shaft and promoting easier raising and tilting of saw blade. Left tilting blade prevents stock from binding between the blade and fence, substantially reducing the possibility of kickback, also aids in making clean miter cuts leaving any tear out on the bottom side of the workpiece. Poly-V drive belt system results in a quieter, more efficient power transfer from the motor to the arbor with virtually no vibration and less heat build up. Built-in dust collection port with sloped cabinet floor and convenient access to the inside of the saw cabinet make for simple clean-up.

  • Quick release riving knife greatly reduces binding/kickback risk
  • Built-in retractable caster system (patent pending) for immediate shop mobility
  • Push button arbor lock (patent pending) for rapid blade change
  • Poly-V drive belt system delivers efficient, quiet operation
  • Wide stance heavy-duty trunnion for stability and smooth blade positioning
  • Adjustable angle indicators (patent pending) on the blade bevel scale for repeatable bevel cuts
  • Industrial-duty Accu-Fence System ensures accurate cuts
  • Enclosed cabinet with cast iron base for rigidity
  • Heavy-duty deluxe micro-adjust miter gauge with aluminum extruded 24" extension fence, for good workpiece support and fine angle adjustments
  • Precision ground high luster cast iron table tops with front edge bevel for hassle-free workpiece positioning.
  • Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
  • Industrial magnetic controls, and jumbo stop switch is reachable with the knee
  • Built-in 4" port for dust collection
  • TEFC Motor with magnetic controls
  • Standard left and right cast iron extension wings
  • Accu-Fence system with 50" to the right cutting capacity, extension table and legs
  • Arbor wrench
  • Motor cover
  • Blade, power cord plug not included

Warning: Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: Click Here


Display SKU 1792000K
UPC / ISBN 662755878930
Brand Powermatic
Shipping Weight 736.6000
Condition New
Manufacturer's Warranty 1 Year
Return Policy Return To Manufacturer Only
Addl Specs
  • Blade Diameter: 10 inches
  • Arbor Diameter: 5/8 inches
  • Arbor Speed: 4300 RPM
  • Maximum Depth of Cut (in.): 3-1/8
  • Maximum Depth of Cut at 45 Degrees (in.): 2-1/8
  • Maximum Rip Right of Blade (in.): 50
  • Maximum Rip Left of Blade (in.): 13-1/2
  • Table in Front of Saw Blade at Maximum Depth of Cut (in.): 11-1/4
  • Maximum Width of Dado (in.): 13/16
  • Maximum Diameter of Dado (in.): 8
  • Table Height (in.): 34-1/2
  • Table Size with Standard Extension (L x W/in.): 42 x 30-1/2
  • Table Size without Extension (L x W/in.): 22 x 30-1/2
  • Dust Port Diameter (OD/in.): 4
  • Dust Collection Minimum CFM Required: 350
  • Dust Collection Adapter Port: n.a.
  • Leg Stand with Steel Storage: n.a.
  • Motor Amps: 13
  • Rapid Wing Extension: n.a.
  • Maximum Cross Cut (in.): n.a.
  • Miter Gauge Type: "Deluxe, micro adjustable with Aluminum extruded fence"
  • Table Size without Wings (L x W/in.): 22 x 30-1/2
  • Table Type: Cast Iron
  • Distance Between Sliding Table and Blade (in.): n.a.
  • Motor HP: 3HP
  • Motor Phase: 1Ph
  • Motor Voltage: 230V
  • Prewired: n.a.
Package Type Individual
Power Source Electric - Corded