${{amount}}
Skip to content
SAVEtember Continues on Monday!
SAVEtember Continues on Monday!
Free Shipping Over $199 on Most Orders »
Register Log In

VIEW CART

Get shipping estimates

Milwaukee 4272-21 1-5/8" Electromagnetic Drill Kit

SKU: milwaukee-4272-21 Model: 4272-21
$999.00
4 reviews
Free Shipping
Milwaukee 4272-21 1-5/8" Electromagnetic Drill Kit

Milwaukee 4272-21 1-5/8" Electromagnetic Drill Kit

SKU: milwaukee-4272-21 Model: 4272-21
4 reviews |
$999.00

Tough tasks are no match with this 1-5/8" Electromagnetic Drill Kit (4272-21) from Milwaukee. Powered by a 13 amp motor, it has a 2 speed gear box so it can be adjusted tool-free between annular cutters at 475RPM and twist drill bits at 730 RPM.

Availability: Only 4 left in stock!

Toolbarn.com

Earn 999 Barn Bucks Learn More.

Availability: Only 4 left in stock!

Tough tasks are no match with this 1-5/8" Electromagnetic Drill Kit (4272-21) from Milwaukee. Powered by a 13 amp motor, it has a 2 speed gear box so it can be adjusted tool-free between annular cutters at 475RPM and twist drill bits at 730 RPM.

Related ProductsProduct Overview Specifications Reviews Recommended

Product Overview

1-5/8" Electromagnetic Drill Kit

Tough tasks are no match with this 1-5/8" Electromagnetic Drill Kit (4272-21) from Milwaukee. Powered by a 13 amp motor, it has a 2 speed gear box so it can be adjusted tool-free between annular cutters at 475 RPM and twist drill bits at 730 RPM. It also boasts auto-stop lift-off detection, and is easy to handle and maneuver.

  • Powerful 13 amp motor
  • Tool-free adjustment: cutter to twist bit
  • Optimized cutting and drilling speeds
  • Tool free motor head adjustment
  • 3/4" weldon quick change arbor
  • 2 speed gear box: 475/730 RPM
  • Auto-stop lift-off detection
  • Tool free feed-handle
  • LED light

In The Box

  • One (1) 1-5/8" Electromagnetic Drill Kit
  • Two (2) 1” retractable pilot pin
  • One (1) 3/4” Weldon to ½” Chuck adapter
  • One (1) Carrying Case
  • One (1) Chuck Key
  • One (1) Lubrication Spray Bottle
  • One (1) Safety Strap

Product Specifications

SKU
milwaukee-4272-21
Model
4272-21
UPC / ISBN
45242346479
Brand
Milwaukee
Shipping Weight
30.0 lb
Condition
New
Manufacturer's Warranty
5 Years
Return Policy
Repair Only
Package Type
Individual
Power Source
Electric - Corded
Battery Voltage
110 AC
Drive Type
3/4 in
Addl Specs
  • Length: 11-1/4 Inches
  • Voltage: 120
  • Capacity Steel: 1-5/8 Inches
  • Amperage: 13 Amps
  • No Load RPM: 475 to 730
  • Drill Travel: 5-3/4 Inches
  • Drill Point Pressure: 800 Pounds
  • Drill to Center From Base: 1-1/4 Inches
  • Overall Height: 14-7/64 Inches
  • Tool Length: 11-1/4 Inches
  • Chuck Size: 3/4 Inch
  • Motor: 2.3 HP
California Proposition 65 Warning

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of those chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Click Here for more information

Reviews

Customer Reviews
3.5 Based on 4 Reviews
5 ★
50% 
2
4 ★
0% 
0
3 ★
25% 
1
2 ★
0% 
0
1 ★
25% 
1
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
DT
05/08/2020
Dom T.

The drill works great but could use a improvement.

It's easy to use with small annular cutters that fit right into the quick release holder. It has a strong magnet that'll hold even when only making partial contact with the surface. The variable speed is max or min nothing in between and hard to tell when the switch is made from one to the other. The toughest con to deal with is the location of the on/off switch. In tight situations you either don't have enough room to turn the drill on or you're too close to leave it on.

Share   |   Facebook  •  Twitter
Was this helpful?  0    0
BG
09/26/2019
Bob G.

A great tool for the shop and job site.

We do a lot of work on stainless steel tanks so we clamp a 1/4" steel plate over the SS and use the mag drill to knock out the work. We found the a 3rd party mag drill stand to use with it as well. Always in use in the shop for bracket fabrication.

Share   |   Facebook  •  Twitter
Was this helpful?  0    0
B
01/21/2019
Boss

A very good drill

Just bought it and it has already saved me a fortune in labor costs. Drilling through steel is a snap now!

Share   |   Facebook  •  Twitter
Was this helpful?  0    0
J
02/13/2018
Jason

Junk

Just bought this drill two months ago to drill to drill a few fence post..... was able to complete around ten posts went to drill my eleventh and the magnet works but nothing else does! The spray bottle is junk and quit the second a few days ago. Very very disappointed buying this drill. Being a homeowner thought this was industrial product and would last forever.

Share   |   Facebook  •  Twitter
Was this helpful?  0    0