QuikDrive
1-1/4" #10 Tile Underlayment Screws (Pack of 1,500)
SKU CB3BLG114S
These 1-1/4", #10 Tile Und erlayment Screws from QuikDrive (CB3BLG114S) are for attaching fiber-cement board to-wood. They have a .375" ribbed wafer head and require a #3 undersized square drive. They have C-3 coating, a mechanical galvanization which provides a protective zinc and tin coating over base metal to delay rusting. The coating is applied by mechanically tumbling zinc and tin powder with the base metal and non-metallic impact beads. (Results in less than .1% surface red rust at 1000 hours of ASTM B117 salt spray test.) These screws come in a straight collation and meet the requirements of ANSI 108. Box of 1500.
- Attaches Fiber-Cement Board-to-Wood
- #3 Undersized square drive - BIT3SU
- Coarse threads
- Nibs under the head for easier countersinking
- Type 17 point
- .375" Ribbed wafer head
- C-3 coating, (a mechanical galvanization,) provides a protective zinc and tin coating over base metal to delay rusting
- Straight collation
- Meet the requirements of ANSI 108
In The Box
- Box of One-Thousand-Five-Hundred (1500) 1-1/4" #10 Tile Underlayment Screws
Warning: Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: Click Here