Ridgid
18V Cordless Press Tool Kit With Pro Press 1/2"- 1" Jaws (RB 330B)
SKU 27918
For convenience and portability, the RP 330-B is the logical choice. Featuring a barrel that rotates 270 degrees and a longer service interval, the RP 330-B is designed to handle your toughest construction projects.
- Designed to mechanically press fittings onto tubing to create a water-tight and permanent seal
- Uses an electrical motor to drive a hydraulic pump which forces fluid into the cylinder of the tool, forcing the ram forward and applying thousands of pounds of pressing force
- The entire pressing cycle lasts approximately five (5) seconds
- Once the cycle begins to deform a fitting, it will automatically continue until completion, even if the trigger switch is released
- The LED displays on the back of the tool indicate problems such as improper temperature, open jaw mounting pin or maintenance required
- Compatible with previous Ridgid Press Jaws
- Powered by a 18V Lithium-Ion Battery, the RP 330-B offers more presses per battery charge than ever before
In The Box
- One (1) Press Tool
- One (1) Set of 1/2" to 1" Jaws
- Two (2) 18 Volt Lithium Ion Batteries
- One (1) Battery Charger
- One (1) Carrying Case
Warning: Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: Click Here
