Senco SFW10XP-A/D XtremePro 3/16" Narrow Crown, Fine Wire Upholstery Stapler Senco SFW10XP-A/D XtremePro 3/16" Narrow Crown, Fine Wire Upholstery Stapler
Senco

Senco SFW10XP-A/D XtremePro 3/16" Narrow Crown, Fine Wire Upholstery Stapler

SKU SFW10XP-A/D

****This Product is No Longer Available On Toolbarn****

Click below to view similar products or the replacement item.



XtremePro SFW10XP-A/D Fine Wire Upholstery Stapler fires 3/16" crown, 22 gauge staples, 3/16" - 1/2" in length. This durable, air powered tool is designed for professional performance. (1D0101N)

Product Overview

Senco XtremePro 3/16" Narrow Crown, Fine Wire Upholstery Stapler

SKU SFW10XP-A/D

  • Full 1" lip length makes getting into tight spots easier
  • Rounded steel cap won't harm fabric
  • Rear exhaust keeps oil off fabric
  • Pinky or push-down magazine release makes loading and unloading the bottom-load magazine easier
  • Cast aluminum outer rail for longer life and durability
  • Both U.S. and metric skirt guide cast into outer magazine
  • No front screw heads: tool glides through fabric
  • Compact tool design easily reaches tight spots
  • Reload window provides access spot to clean lint from magazine without having to dissassemble the tool
In The Box
  • One (1) SFW10XP Fine Wire Stapler A06-A08/D10 Tool

Warning: Products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: Click Here

Specifications

Display SKU SFW10XP-A/D
Brand Senco
Shipping Weight 2.5000
Condition New
Product Weight (lbs.) 2
Manufacturer's Warranty 5 Years
Return Policy Repair Only
Addl Specs
  • Staple Crown: 3/16 inch
  • Staple Length: 3/16 to 1/2 inch
  • Wire Gauge: 22
  • Staple Capacity: 110 - 185
  • Reg. Operating Pressure: 60 - 95 psi (4.1 - 6.5 bar)
  • Air Consumption (60 cycles per minute): .77 scfm
  • Air Inlet: 1/4 inch NPT
  • Mode of Operation: Single Actuation
  • Tool Dimensions (H x L x W): 5.81 x 9.5 x 1.6 inches
Power Source Pneumatic